#Mahr/Federal Pocket Surf Portable Surface Roughness Gage

#Mahr/Federal Pocket Surf Portable Surface Roughness Gage

 Order at Light Tool Supply http://www.lighttoolsupply.com

Portable Surface Roughness Gage.

• Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory.
  
• Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging.
  
• Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz.
  
• Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/.030 in.
  
• Operates in any position – horizontal, vertical, and upside down
  
• Easy-to-read LCD readout presents the measured roughness value, in microinches or micrometers,
  within half a second after the surface is traversed.
  
• Out-of-range (high or low) and “battery low“ signals are also displayed.
  
• Four switchable probe positions – axial (folded) or at 90°, 180° or 270°
  
• Even difficult-to-reach surfaces such as inside and outside diameters are accessible.
  
• Integrated data output for SPC-processing units that is compatible with the most common data processing systems.
   

http://www.mahr.com

#"Miracle Point" Magnetic Base Protractor

"Miracle Point" Magnetic Base Protractor

 Order at http://www.lighttoolsupply.com

 

 

"Miracle Point" Magnetic Base Protractor
Features:

• Protractor is permanently attached as an integral part of a powerful Magnetic V base containing lifetime Alnico magnets.
• V base is precision ground.
• Gives immediate readings of angles for full 360 degree radius.

The TOOL with UNLIMITED USE ANGLE FINDER & CENTER LOCATOR Protractor Uses

• This accurate protractor has an extremely sensitive, balanced needle which gives immediate reading of angles for 360 degree radius.
• The V base exerts a powerful magnetic pull to most any shape/form. The V base is precision milled and the center pin will show the middle point.

Toolroom and Machine Shops

• Determining angles on shapers, milling machines, grinders, etc.
• Quickly finds center of square or round stock.
• All angle finding operation in your shop.

Welding Shops

• Indispensable in quickly and accurately determining angles.

Construction and Maintenance

• Locate plumb and centerline.

Auto and Truck Stops

• Checks drive line angles and many other uses.

900-22 Lens Guard

The lens of the Miracle Point needs protection in harshenvironments. Lens Guard will protect the edge of the lens. Easy to install or request Lens Guard with your repair service. *Kit includes lens, guard & glue

Specifications:

Height: 5-1/4"
Width: 5"Depth: 1"
Weight 16 oz.
Packaged one per carton

For an instructional video on this product

CLICK HERE

MarCal Digital Caliper 16 EWR without data output

MarCal Digital Caliper 16 EWR without data output

Order at Light Tool Supply http://www.lighttoolsupply.com

MarCal Digital Caliper 16 EWR without data output

Specifications:



Features:

• All Mahr digital calipers with "Reference" logo are equipped with the innovative Reference-System.
• The zero position just has to be set once: after setting the zero position, the zero remains stored for all further measurements. Therefore, once the caliper is switched ON or the slide is moved, the caliper is immediately ready for measurement. The need to reset to zero with a conventional caliper once the caliper is switched on has now become obsolete.
• Functions:ON/OFF, RESET (Set display to zero), mm/inch, Reference-Lock/Unlock, Auto-ON/OFF
• Immediate measurement due to the Reference system
• Excellent resistance against dust, coolants and lubricants, Protection Class IP67
• Life of the battery up to 3 years
• High contrast Liquid Crystal Display with 8.5 mm high digits
• Lapped guideway
• Dirt wipers are integrated in the slide
• Max measuring speed 2.5 m/s (100“/s)
• Slide and beam made of hardened stainless steel
• Measuring blades for inside measurement
• Step measuring function
• Locking screw
• Supplied with: Case, battery, operating instructions

#Hitachi 1-1/2" Spline Rotary Hammer

Hitachi 1-1/2" Spline Rotary Hammer

Order at Light Tool Supply http://www.lighttoolsupply.com

 

5.2 ft-lbs of impact energy delivering high-speed drilling and forcible chipping

8 Amp motordelivers maximum productivity

2 modes of operation hammer & drill and hammer only for flexibility within a range of applications

Sealed grease system ensures minimal maintenance

Dust proof cover protects tool for extended maintenance free operation

Auto-stop carbon brush system to prolong tool life and protect armature

Removable side handle with depth gauge improves control and ensures accurate drilling depth

Includes:

Depth Gauge

Side Handle

Injection Molded Carrying Case

3 Dust Covers

Hex Wrench

Hammer Grease (1oz tube)

Shank Spline
Chuck Size 1-1/2"
No-Load Speed 380rpm
Impact Rate 2800bpm
Impact Energy 5.2 ft-lbs
Amps 8
Capacity: Drill Bit 1-1/2"
Capacity: Core Bit 4-1/8"
Modes of Operation Hammer/Hammer & Drill
Switch Electronic
Handle Type D
Power Input 870W
Tool Length 17-15/16"
Tool Weight 17.0lbs

 

Rubbermaid X-TRA Instrument Cart

Rubbermaid X-TRA Instrument Cart

Order at Light Tool Supply  http://www.lighttoolsupply.com/

 

 

 

Rubbermaid X-TRA Instrument Cart

Features:

• Lockable doors secure contents.
• Sliding top tray under shelf holds paper, pens and small instruments.
• 300 lbs. total load capacity, 100 lbs. per shelf.
• 3 large shelves, 19" x 29-1/2"
• Overall Dimensions 40-5/8" x 20" x 37-13/16"
• All surface are smooth for easy cleaning.
• Large 4" non-marking casters.
• Color: Gray
• Ships via UPS 52 lbs
• Rubbermaid model # 4094

Bison 3-Jaw (2Pc) 25" A2-15 Extra Heavy Duty Scroll Chuck with 10.75" Hole

Bison 3-Jaw (2Pc) 25" A2-15 Extra Heavy Duty Scroll Chuck with 10.75" Hole

 

 

3-Jaw (2Pc) Scroll Chuck Forged Steel, Extra Heavy Duty, 25in, A2-15 10.75in Hole

BISON-BIAL 3-Jaw Self-Centering Extra Heavy Duty Chucks

Forged Steel Body Large Thru-Hole

Standard Accessories:

• 1 Set of two-piece heavy duty reversible jaws
  (hard top jaws and hard master Jaws)
• 1 Wrench
• 1 Set of Mounting Bolts

Optional Accessories:

• Soft top jaws
• Hard top jaws
• Chuck wrench with flat T-bar end
• Chuck wrench for fast jaw movement

Chuck Diameter	in (mm)	25 (635.0)
Mount		A2-15 Indirect
Maximum Speed	RPM	850
Weight	lb (kg)
Hole Diameter d	in (mm)	10.75 (273.1)
M Thread		M24 x 3
Gripping Force, Wrench Torque	Nm	570
Gripping Force, Jaw	lb	22950
Max Load Capacity per Chuck	lb (kg)	7800 (3545.4545)
Max Weight of Workpiece	lb (kg)	15600 (7090.9091)

Clamping Capacity, Min d1	in	3.15
Clamping Capacity, Max d2	in	24.8

Servo Dynamo Power Feeds

Servo Dynamo Power Feeds

Order at Light Tool Supply 

http://www.lighttoolsupply.com/

 

 

 

For Bridgeport Type Milling Machines And other popular Series 1 Knee Mills

Variable speed control Feed rate: 0.4 to 37.4; 140 torque.

Electro-mechanical clutch for superior cutting at slow speeds.

Helical gear for quiet, dependable operation.

Jog switch and rapid traverse button.

Special safety features include: Fluid protective lip. on/off circuit breaker.

Warranty 1, year, 115v single phase.