Cuttermaster End Mill Sharpener & Tool Grinder - The Original

Order at Light Tool Supply http://www.lighttoolsupply.com/

Product Description

Cuttermaster End Mill Sharpener & Tool Grinder - The Original

Complete with Air Bearing Fixture, Work Area Lighting, 5” Cup Aluminum Oxide Wheel & Air Filter

• Grinds O.D.s and ends of standard end mills in one setup within just a few minutes.
• Extremely versatile and is used for much more than just end mills. With the z-axis you get 8 different axes to work with for unlimited versatility.
• 1 Machine grinds it all end mill, drills, roughing endmill, taps, countersinks, carbide tools, radius end mills, lathe tool bits, various forms tools, reamers, performs gashing and much more.
• The pneumatic finger instantly and automatically sets primary and secondary clearance angles with the flip of switch.
• Dials zero out.
• Air bearing has a 360 degree swivel base for taper grinding.
• The Jet-Stream air bearing fixture is precision honed and capable of grinding to close tolerances. The spindle sleeve is made from stainless steel and the spindle itself is hard chromed steel.
• Takes standard 5C collets, with end mill holders available that can hold shank sizes up to 2".
• Tables are cast 2" iron and precision ground.
• Motor/spindle assembly tilts to positive and negative angles, cutting tool clearance angles can be adjusted as needed.
• Grinding chart provides clearance angles for all end mills from 3/16"-3".
• 1 year warranty against factory defects and workmanship.

Specifications:

Air Bearing Stroke	10.5"
Air Bearing Swing over Table	9.8"
Cutting Tool Capacity	2" shank, 9.8" O.D., 10.5" flute length
T-Slot Dimension	.800 x .500 x .670
Table Feed Graduations	.001 or .02mm
X-Axis Table Travel	6"
Y-Axis Table Travel	3", plus motor sildes back & forth 6"
X-Axis Table Working Space	16.5" x 5.5"
Y-Axis Travel Working Space	13" x 5.5"
Wheel	5" cup (or 6" dish with Z-axis), 1-1/4" arbor
Motor Tilt	+35/-8 degrees
Motor	1/3 HP, 3450 RPM, 110V/60hz or 220V/50hz
Net Weight	180 lbs. / 82 kilos
Gross Weight	232 lbs. / 106 kilos
Machine Dimensions, not includinghandles	21" x 20" x 21"
Shipping Dimensions	30" x 28" x 29"

Johnson Machine Mountable Electronic Level w/ Bluetooth

Order at http://www.lighttoolsupply.com

• Use for new machinery installation and machinery relocation
• Read level in X and Y axis at the push of a button
• Remote control features large LCD screen reads level in X or Y axis
• Green backlit screen reads digitally and graphically
• Reads via cable outlet or wireless Bluetooth
• Bluetooth supported operating range 32'
• Reads slope in %, mm/m, and in/ft
• Operation range is + 10 degrees of level
• Measures level in X or Y axis to within a maximum accuracy of 0.01 degrees

Includes:

• Machine Mountable Electronic Level w/3 AA Batteries
• Remote Control w/3 AA Batteries
• DC 5V adapter
• Remote cable & PC cable
• Carrying case w/strap

Specifications:

Operation Range	-10° ~ +10°
Leveling Axis	X & Y
Resolution	0.002°, 0.01°, 0.1°, 1°
Repeatability	< 0.005° (2δ)
Absolute Accuracy (25°)	< 0.01° (±3°) < 0.04° (±10°)
Temperature Drifting	< 1'' / °C (0°) < 1.5'' / °C (±3°)
Response Time	< 2S
Operation Temperature	14º F to 122º F (-10° C to +50° C)
Storage Temperature	-4º F to 140º F (-20° C to +60° C)
Weight	1.575 lbs (.714 kg)
Dimensions	5.25" x 2.75" x .95" (134mm x 70mm x 24mm)
Communication from Electronic Level to Remote Control	Electronic Level Remote Control Bluetooth Output * 1 Cable Output * 2 or Bluetooth Output * 1 Cable Output * 1 PC Output * 1
Power Supply	Remote Control: 3 AA Alkaline Batteries Electronic Level: 3 AA Alkaline Batteries or DC 5V adapter
Range for Bluetooth	32' (10m)
Audible Alarm	1. Out of Level Range Indicator 2. Low Power Supply Indicator
Battery Life	Electronic Level: 8 hours Remote Control : 8 hours
LCD Back Light Color	Green
Warranty	1 year

PRO3600 Digital Level penntoolco.com

#PRO3600 Digital Level Video

Smart Tool Digital Protractor Level PRO360 & PRO3600

Order Here

PRO360 & PRO3600

The PRO 360 and PRO 3600 digital protractors are high performance, angle measurement tools that are sold
exclusively through our network of industrial distributors. Both units have a One Year Limited Warranty, CE Certification and National Stock Numbers.* These state-of-the-art, angle measurement tools have features such as "Hold" which lets you to store the last reading taken with a touch of a button. They also have "Alternate Reference" (Alt Zero) which allows you to electronically zero the reading anywhere within the digital protractor's 360° range. The PRO 3600, in addition to higher resolution (0.01°), has an RS-232 port so you can output the angle measurement data to a computer. Both protractors can be easily fitted with an available, magnetic base or an array of custom attachments.

The PRO 360 & PRO 3600 Digital Protractor from SmartTool Technologies is a revolutionary measuring tool that provides an immediate, digital reading of all angles in a 360° range. The unit utilizes a patented, liquid-filled sensor combined with precision measurement circuitry to provide unparalleled accuracy and stability.

A precision machined aluminum frame provides a rigid, lightweight, ultra-precise platform for extremely accurate measurements. The frame is grooved along the bottomsurface to facilitate use with round objects such as pipes or shafts and incorporates threaded holes on the bottom for rigid attachment if desired.

The front panel buttons can be used to capture desired readings or to designate an alternate reference surface from which subsequent angles are then measured. The unit can also be easily recalibrated in the field to factory accuracy using any available flat surface.

PRO 360: Full 360 degree range (90° x 4) Easy to read LCD display which intelligently flips over when the unit is upside down. Maximum accuracy of +/- 0.1° and maximum resolution of 0. 1° Precision, machined aluminum frame. Unit can be recalibrated to factory accuracy in the field without special tools or fixtures. PRO 360 Specifications The unit operates for up to 500 hours on a single9V battery, incorporates an automatic power down feature, and ships standard with a rigid plastic case.

Applications include:

• Automotive
  • Driveline Measurement
  • Racecar wing &chassis adjustment 
  • Frame straightening
  • Drive shaft alignment
• Aerospace
  • Control surface rigging
  • Prop adjustment
  • Fire control elevation
  • Rotor angle measurement
  • Aircraft leveling
  • Aircraft flap calibration
  • Satellite or aerial alignment
• Industrial
  • Machine tool set up
  • Lathe and mill alignment
  • Quality Assurance verification
  • Roadorrail-track layout
• Medical
  • Range of motion measurement

The protractors have passed tests for EMI and RFI compliance as part of our testing for the CE Mark Declaration of Conformity. The PRO-360 and PRO-3600 are certified for light industrial environments and conform to the requirements of the EN50082-1:1992 standard.

National Stock Number (NSN)
PRO-360 NSN#5220012512120
PRO-3600 NSN# 5210014180671

Mitutoyo Digimatic Electronic Caliper & Micrometer Set

# 500-196 Caliper
Range: 0 - 6" / 0 - 150mm
Accuracy: ±.001"
LCD Resolution: 0.0005" / 0.01mm

• Large and clear LCD readout
• The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
• Data Hold Unit (959143) is optional
• Supplied in fitted plastic case

Technical Data:

• Accuracy: ±.001"
• Resolution: 0.0005"/0.01mm
• Repeatability: 0.01mm / 0.0005"
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder
• Max. response speed: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 3.5 years under normal use

Function:

• Origin-set, Zero-setting, Data output, inch/mm conversion
• Alarm: Low voltage, Counting value composition error

# 293-340 Micrometer
Range: 0 - 1" / 0 - 25.4mm
Accuracy: ±.00005"
with ratchet stop, w/o SPC
Coolant Proof IP65-MX Micrometer

Twice as Long Battery Life as before and Drastic Improvement in Measurement Efficiency

• IP65 protection level, enabling use in environments exposed to cutting oil, etc*.
  *Anti-corrosion treatment is required after use.
• Measurement data output function is available with a water-resistant connection cable.
• Auto power ON/OFF function.
• Certificate of inspection* is included.
  (50mm/2" or less range models) *It is not the type used to obtain calibration certificates.
• Supplied in fitted plastic case.

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.001mm or .00005"/0.001mm
• Flatness: 0.3µm/.000012"
• Parallelism: 1µm/.00004" for models up to 50mm/2"
  2µm/.00008" for models up to 100mm/4"
  3µm/.00012" for models up to 175mm/7"
  4µm/.00016" for models up to 275mm/11"
  5µm/.0002" for models over 300mm/12"
• Measuring faces: Carbide tipped
• Display: LCD
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 1.2 years under normal use
  (8 months: over 100mm models)
• Dust/Water protection level: IP65

Function:

• Origin-set, Zero-setting, Automatic power on/off, Data hold,
  Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Fowler Quadra Test Sylvac Indicators IP65

• True Inch/Metric conversion.
• Water, oil & coolant resistant.
• 1-1/2" diameter dial face rotates a full 360 degrees.
• Bar graph and numeric digital display.
• .080" contact point length.
• Meets or exceeds Din/ISO standards.
• Maximum error on .00005" scale at full range: .0004".

4 Measuring Resolutions

Resolution	Smallest Division
0-40-0	.0005"
0-40-0	.00005"
0-1-0	0.01mm
0-1-0	0.001mm

History of Penn Tool Co. Inc

http://www.penntoolco.com/

 

 

 

 

Gene Elson
Founder, President & CEO of Penn Tool Co.

Back in 1968 Penn Tool Co. was just a small hardware store on Market Street in Newark NJ.  This particular area of Newark NJ was called the "Ironbound" section because of the network of railroad tracks and the large metalworking industry in the area.As a result of the close proximity of The Penn Station Train Terminal, Gene decided to call his business Penn Tool Co. Gene's business started out selling tools much like any other hardware store.  As the metalworking industry slowly left Newark NJ, it became very apparent that diversification was needed.  Newark NJ and its local economy could no longer support the old method of doing business.  Gene smartly transformed Penn Tool Co. into a company specializing in precision measuring instruments for the metalworking community.  Gene decided that tools would need to be put into catalogs and sent throughout the United States, thus expanding the market in a new way.  He created the catalogs in house which at the time was not very common in the tool industry.  Mailing lists were compiled and catalogs sent out.  It was a huge success.
For over 45 years, Gene Elson has been President of Penn Tool Co. and is still using his knowledge and creativity to make his business the best in its class.  Gene can often be found at Industry Trade Shows searching for new and unique products.  While relaxing Gene is happiest listening to Jazz, playing tennis, and fishing or boating on the NJ Shore.

Gene Elson, President and founder of Penn Tool Co.
Having a visit from overseas supplier.
Picture taken 1988

Gene Elson, President and founder of Penn Tool Co.
Working on his print catalog.
Picture taken 1983

 

 

 

 

 

Michael Elson
Vice President

Michael grew up in the tool industry working summers in the shipping department and unloading delivery trucks.  After studying business and marketing at the University of Arizona, Michael came back east to work full time at Penn Tool Co. When he first started his career in the tool industry, the only way to reach out to customers was through paper catalogs and using mailing lists to target potential business.  With the advent of the Internet, Penn Tool Co., slowly transitioned from the paper catalog to online purchasing over the internet.  Throughout the years many lessons were learned and in 2014 Michael spearheaded the re-launch of penntoolco.com.  Using his many years of knowledge and experience in the tool business, Michael created the website he felt his customers kept asking for.  Every detail of the new website was meticulously thought out by Michael and his new web development advisors.  The result is a user friendly website making purchasing tools online a quick and simple process. 
In addition to website development, Michael is highly trained and certified to do business with the United States Government fulfilling GSA Contracts.  During his many years working in the industry, Michael has personally visited many of the factories that manufacture tools sold at Penn Tool Co. Michael has traveled extensively  throughout Latin America, Europe and Asia ensuring the quality of tools sold by Penn Tool Co., meet his strict standards. Michael also is a firm believer in having direct communication with his customers.  Aside from being in upper management at Penn Tool Co., you can actually speak to Michael directly anytime by calling 800-526-4956 Ext.  107.

Michael Elson, President of Light Tool Supply working in machine shop. (Picture taken Maplewood NJ 1994)