Thursday, April 25, 2013

CDI Chicago Electronic Indicators - Logic IQ

CDI Chicago Electronic Indicators - Logic IQ

CDI Chicago Electronic Indicators - Logic IQ

  • 3 Programmable Presets & 3 Programmable Ratios
  • Absolute/Preset Measuring Mode
  • Incremental Measuring mode
  • SPC Cables USB, MTI, RS232
  • Measuring System in English or Metric
  • Travel Reverse
  • Auto Off
  • Floating Zero
  • Rotating Bezel
  • Internal and External Serial Numbers
  • T.I.R. Measuring with Low & High Storage Recall
  • Power with Batteries
  • Additional Power Options Through AC Jack or Data Output
  • Programmable Lock Combination
  • User Tolerance Settings (high and low)
  • Up to 4 User Changeable Resolutions
  • Inch/Metric display conversion
  • Large LCD Display
  • Maximum Reading Hold
  • Display / Freeze Reading Hold
  • Minimum Reading Hold
  • Extra Large Number Display

Best selection of #DigimaticCalipers

Digital / Electronic / Digimatic Calipers

Light Tool Supply has the lowest prices on Digimatic Calipers from the top manufactures. Our leading digital caliper brands are MitutoyoBrown & SharpeFowler,MahrStarrettTesa, and SPI. If you are looking for digital calipers, Light Tool Supply has the one you are looking for.
Mitutoyo ABSOLUTE Digimatic Caliper Series 500
Mitutoyo Absolute Coolant Proof Electronic Calipers
Mitutoyo Digimatic Carbon Fiber Caliper-Series 552
Mitutoyo ABSOLUTE Inside Caliper Series 573
Mitutoyo ABSOLUTE Snap Caliper Series 573
Mitutoyo ABSOLUTE Low Force Caliper Series 573
Mitutoyo Offset Centerline Caliper
Mitutoyo Tube Thickness Caliper
Mitutoyo Offset Jaw Digimatic Calipers
Mitutoyo Absolute Super Solar Caliper
Mitutoyo Point Calipers

Tuesday, April 23, 2013

Baileigh GS-450 Cold Saw Blade Sharpener

Baileigh GS-450 Cold Saw Blase Sharpener

Baileigh GS-450 Cold Saw Blade Sharpener

Circular Saw Blade Sharpener

HSS Precision Sharpening for Circular Saw Blades.

The GS-450 is the perfect circular saw blade sharpener allowing you to do your own sharpening economically and quickly right in your own shop. It increases efficiency as cold saw blades can be sharpened to exact specifications without delay.

  • All cast components are made from ductile iron. Simplified design, easy operation and precision built allowing for years of accurate sharpening.
  • Alternate high/low teeth can be sharpened in one pass. The tooth height difference is varied and shown on the indicator for perfect circular saw blade sharpening.
  • Quick set cutting angle saves valuable set-up time so that sharpening is done quickly. Blade thickness is quickly adjusted and can be read on the indicator meter.
  • Tooth chamfering is easily performed without having to change the grinding wheel.
  • Economical, efficient and simple construction. Drive assembly is a simple combination of driving motor and cam drive motor, providing trouble free operation.
  • Micrometric adjustment for pitch and depth of teeth. Variable speed pulley allows a complete range of feed from 45 to 180 teeth per minute.
  • Convenient hand lever changes tooth profile quickly.
  • Positioner tungsten carbide tipped for long wear and offers accurate feeding.

    Blade Size (max): 17.71” x .314”
    Tooth Pitch (max): .984”
    Tooth Height: .314"
    Cutting Angle Adjustment: -5 deg - + 25 deg
    Lateral Tooth Chamfer Angle (2 sides): Up to 45 deg
    Speeds: 2
    Motor: .75 hp
    Power Requirement: 220v / 1 phase
    Shipping Dimensions (L/W/H): 60” / 44” / 48”
    Shipping Weight: 350 lbs



    Harig's precision mounting table permits a variety of machining applications. Ideal for light drilling, milling, boring, jig-grinding, and EDM workholding. Having workpiece overhang edges can extend 6" x 12" capacity. The Edge-Master allows a flush-cup to be mounted beneath the workpiece for EDM reverse flush set-ups. When "tenths" accuracy is needed on an all-purpose mounting table, look no further than the Edge-Master. Reliability backed by Harig's trademark service.
    • 6" x 12" capacity can be expanded with workpiece overhang
    • 2 rails on vertical mounting blocks provide constant x/y coordinates
    • A support block may be used for precise flatness and quick set-ups
    • Hardened and ground to "tenths" for accuracy
    • Ideal for multiple parts
    • Mounting holes provide flexibility
    • 2 Flush Cup sizes available: 1" (P/N 50-08), 2" (P/N 50-07), 3" (P/N 50-06)
    • Full repair service and replacement parts available

    #Baileigh Portable Metal Cutting Band Saw - BS-127P

    Order at Light Tool Supply

    Portable Band Saw

    Baileigh Portable Metal Cutting Band Saw - BS-127P 
    Baileigh Portable Metal Cutting Band Saw - BS-127P

    The BS-127P from Baileigh Industrial is a high quality portable band saw that will give any shop years of profitability. The BS-127P is 110 volt so it can work in any setting and it’s driven by an inverter that allows the operator to adjust the blade speed from 75 to 246 feet per minute, to achieve the best cut possible, as well as increase blade life.

    This 5” round capacity band saw will also miter to 60 degrees right via the swivel head of the saw instead of the vise. This will make for more accurate cuts and doesn’t compromise the holding power of the vise.

    Adjustable blade guides, trigger handle and stop rod are also included in this great package.


    Return Manual
    Miter Adjustment Swivel Head
    Miter Angle 0 - 60°
    Capacity Rectangular 90° x 45° 5.31" x 5" / 3" x 6.75" / 1.65" x 2.9"
    Capacity Round 90° x 45° 5" / 3" / 1.65"
    Capacity Square 90° x 45°5" / 3" / 1.65"
    Blade Size (H x W x L) .5" / .025" / 56.69"
    Blade Speed (fpm) 75 - 246 Variable
    Drive Gear
    Power 110V
    Shipping Weight 56 lbs.
    Shipping Dimensions 28" x 15" x 18"

    Sunday, April 21, 2013

    #Versahaul VH-55 and my #Vespa GTS300

     Versahaul Single Motorcycle Carrier with Ramp Option used to tow a Vespa GTS300

    With my Jeep Wrangler Unlimited

    I just wanted to write a little about my experience using a Versahaul Trailer with my Vespa GTS300 Super Scooter.  Last fall I was in a little predicament when Hurricane Sandy hit.  We all had a few days notice a BIG storm was coming.  The weekend prior I was on the Jersey Shore where I keep my Vespa.  It was brand new for 2012.  For someone who previously owned a Harley Davidson and a Yamaha R-6 buying a Vespa was a step in a totally different direction.  I still miss my Harley very much but the crotch rocket was hurting my shoulder when I was riding it.  No fault to the R-6, but it was more that my shoulder ached after riding for long periods of time.  Anyway, I am digressing from Hurricane Sandy and the problem I had last fall.  It seems I only had a few days to get my Vespa off the Jersey Shore or it would for sure be a goner.  I keep it in a parking garage which is a good thing.  The bad thing is that the sides of the garage are open and although covered, Hurricane Sandy surely would have made mince meat of the Scooter if I left it.  I wish I prepared for something like this but the fact was I was not prepared.  I needed to get the Vespa north to the Safety of my Tool Warehouse which was 50 minutes away on The Garden State Parkway.  So what was the problem?  The problem was although the Vespa can do 80 MPH, I really did not want to go on the Parkway with all the crazy drivers doing 80-90 MPH.  I had no choice.  With my motorcycle experience and my fingers crossed I jumped on the GSP and drove my Vespa to safety.
    All winter my Vespa was safe and sound in storage but I knew as soon as the weather broke I would want to ride again at the beach.  This time I bought a Vershaul Trailer from the Vespa Dealer where I originally purchased my Scooter.  I was really doubtful the Vershaul would work with my Vespa.  Especially with my Jeep Wrangler and the tire in the back.  However the dealer said don't worry it is going to work.
    I followed all the instructions that came with my Versahaul which were very brief and to the point.  I did have to make a call to the mfg. and ask a few questions about the assembly but all in all it is very simple.  I am not sure why there are not more instructions about how to secure the Motorcycle or Scooter to the Versahaul?  I had to look on the web to various websites like Modern Vespa for tips.  Anyway, after my experience this past weekend I felt inclined to write a little bit about my experience with Versahaul and I have to say they make an excellent product.  Certainly heavy duty and certainly did the job flawlessly.  I really thought that my Vespa would fly off the Versahaul after I hit my first pothole but that was just not the case.  For around $500.00 I now have the ability to tow my Vespa anywhere at a moments notice.  You don't have to register it with the State like other trailers.  It is made in the USA which although I own a Vespa, I do like to buy U.S. made items as much as possible.  The one thing that I would recommend to anyone who is thinking of using a Vesrsahaul is to get a good set of tie down straps.  I was lucky enough to sell them, because I had a really bad pair I was going to use at first, until someone at work mentioned we have some really heavy duty Erickson ties downs on our shelf.  These worked like a charm and the cheaper straps I used on an old Waverunner of mine certainly would not have worked at all.  Below are some pictures of the adventure I had last weekend.
    I am giving big props to Versahaul on a great product!

    Single Motorcycles Carrier with Ramp


    Friday, April 19, 2013

    #Darex V390

    Darex V390 Industrial Drill Sharpener

    Darex V390 Industrial Drill Sharpener


    The V390 Drill Grinder And Sharpener sharpens common point styles with ease. Priced right for any small shop. Even very small shops can now sharpen their own drills, and keep on working. For the cost of less than 100 drills, you can accurately sharpen your most common drills in under a minute.
    V390 Specifications:
    • Ideal for: Shops that demand a precision sharpener at a value price that operates quickly and intuitively
    • Duty rating: Standard duty, intermittent use
    • Cutting tool diameter: 1/8"–3/4" (3–19 mm)
    • Operation mode: Manual
    • Point angles sharpened: 118°–140°
    • Point styles sharpened: Standard conic and split point
    • Power: 4.5 amps at 115V, 3 amps at 230V; 2850 rpm
    • Machine size: 12" x 11" x 9" (30 x 28 x 23 cm)
    • Machine weight: 25 lbs (11 kg)
    • Sharpening Wheel included: Borazon (CBN) for HSS & cobalt (diamond option for carbide available)
    • Grit removal system: Optional vacuum
    • Options available:
      • 180-grit diamond wheel
      • Morse Taper chuck


    Thursday, April 4, 2013

    Lowest prices on #DigimaticCalipers

    http://digimaticcaliper.com/ has the lowest prices on Digimatic Calipers from the top manufactures. Our leading digital caliper brands are MitutoyoBrown & SharpeFowler,MahrStarrettTesa, and SPI. If you are looking for digital calipers, Light Tool Supply has the one you are looking for.