www.lighttoolsupply.com

Thursday, August 18, 2011

#MarSurf PS1 - Absolute Mobility

Order below @ Light Tool Supply 
MarSurf #PS1 - Absolute Mobility
With the need for increased manufacturing and machine performance the quality of a product's surface finish is becoming ever more important. This makes it all the more crucial to offer measuring  instruments that are easy to use with fast and accurate results correlated to industrial standards.
PS1 3
In some cases measurements that were once performed in the inspection room have been transferred to production to save time and money. Components may be too large or heavy to be moved leaving no alternative but to make measurements directly on the part in the manufacturing area.

The MarSurf PS1 lives up to its claim of "absolute mobility" in many ways by allowing the measurement to be performed in the manufacturing area - right on the machine. The PS1 offers:


  • A wide selection of parameters and measurement settings with a large family of probes and accessories for all your basic measurement applications.
  • A rechargeable power source that allows for over 500 measurements.
  • An all-in-one solution that is no larger than a digital camera; small and lightweight.

To download the MarSurf PS1 brochure- Click here! 

Wednesday, August 17, 2011

Monday, August 15, 2011

#CRESS Bench Top #Heat #Treating #Furnaces Equipped with PM3E


CRESS Bench Top Heat Treating Furnaces Equipped with PM3E

Order at Light Tool Supply 

http://www.lighttoolsupply.com/cress

 

 

CRESS Bench Top Heat Treating Furnaces Equipped with PM3E

 

 

CRESS Bench Top Heat Treating Furnaces Equipped with PM3E

"Heat Treating Furnaces" also known as hardening furnaces
Heat treat (Hardening) furnaces have higher heat output power than draw furnaces due to the elevated temperatures at which they operate. Heat transfer to the tool steel is accomplished by a very efficient process called direct radiation. Temperature uniformity in these furnaces is best in the red heat range. Normal maximum temperature is 1232°C (2250°F). Optional 1316°C (2400°F.) maximum temperature versions are available.

Uses:
These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300°F to 2250°F ±25 °F are required. They are used for heat treating metal, assaying and all types of testing. 2400° F maximum temperature option available at additional cost.

Temperature Controls: Auto tuning microprocessor-based controller.

Heating elements:
Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates.

General construction: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone. The walls and door are constructed of the finest quality insulating fire brick backed up by 1800°F block insulation.

Safety switch:
These models come equipped with dual door safety Switches. when the door is opened, power is disconnected from the heating Elements.

Door:
The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator.
A Kaowool® rope seal is installed on the door where it meets the Chamber.

Friday, August 12, 2011

GENERAL 100:1 ULTRA-HIGH TEMPERATURE INFRARED THERMOMETER

GENERAL 100:1 ULTRA-HIGH TEMPERATURE INFRARED THERMOMETER     $810.00

 Order at Light Tool Supply here http://www.lighttoolsupply.com/IRT5000

GENERAL 100:1 ULTRA-HIGH TEMPERATURE INFRARED THERMOMETER

This rugged, industrial-duty IR Thermometer is designed for those intense– heat applications that off-the-shelf units can’t handle. The IRT5000 measures temperatures up to 4350°F (2400°C) with an accuracy of +/-2%. Its 100:1 spot ratio, enabled by its sophisticated dual laser tracking system allows the user to pinpoint the area to be measured over a great distance. This hi-tech unit provides hi/low temperature alarms and can store up to 24 data points.

Features & Benefits :
• 100:1 distance to spot (D:S) ratio
• Stores up to 24 data points
• Ultra-high temperature operation up to 4352°F(2400°C)
• High/Low alarm levels
• Fast response time of 0.5 seconds
• Min/Max/Dif memory
• Dual lasers to track target/spot size

Specifications :
Distance to Spot (D:S) Ratio: 100:1
Measurement Range:392° to 4352°F (200° to 2400°C)
Measurement Accuracy: ±2% of reading
Measurement Range with “K” TypeThermocouple: -83.2° to 2552°F(-64° to 1400°C)
Accuracy with “K” Type Thermocouple:±1% of reading
Emissivity: Adjustable from 0.10 to 0.95
Battery Life: Approximately 140 hours
Dimensions:2.4 x 8.2 x 9.2 in. (61 x 208 x 234mm)
Weight: 16.8 oz. (475g)
Power Source: 2 “AA” batteries (included)

Includes :
• 1 “K” Type Bead Thermocouple
• Batteries
• User’s manual

INCH DIMENSIONS
Package Specifications = H: 17'' W: 15.5'' D: 5'' Cube: 0.7624 Weight: 123oz Weight: 7.6875lbs
Shelf Pack Specifications = H: 17'' W: 15.5'' D: 5'' Cube: 0.7624 Weight: 123oz Weight: 7.6875lbs

METRIC DIMENSIONS
Package Specifications = H: 431.8mm W: 393.7mm D: 127mm Cube: 19.36496 Weight: 3486.991344375gr Weight: 3.486991344375Kg
Shelf Pack Specifications = H: 431.8mm W: 393.7mm D: 127mm Cube: 19.36496 Weight: 3486.991344375gr Weight: 3.486991344375Kg