CLAUSING/Ibarmia Series P Geared-drive Prismatic-column Drills

Order at Light Tool Supply for lowest price on the Internet  $48,900.00
http://www.lighttoolsupply.com/CLAUSING-Ibarmia-Series



CLAUSING/Ibarmia Series P Geared-drive Prismatic-column Drills With Electromagnetic Clutch Automatic Feed Control

The P series Industrial Drilling Machines are built with a extra heavy-duty base and worktable to handle large and heavy work pieces.

Standard Features and Equipment: Drilling capacity in steel: 2.75" (70mm) maximum Drilling capacity in cast iron: 3.14" (80mm) maximum Tapping capacity in steel: 2.51" (64mm) maximum Tapping capacity in cast iron: 2.68" (68mm) maximum Automatic feed reversing system for tapping on “RS” models Adjustable of vertical position of head by geared-motor Large worktable with 3 T-slots Hardened and ground high quality steel gears Gear box lubrication by automatic pump Guide ways lubricated by manual pump Speed plate and selecting levers on front of head Coolant tank and pump in machine base Automatic feed and cut-off by electromagetic clutch Work light   Front hand wheel for fine feed work Depth scale and adjustable depth stop Built-in low voltage electrical equipment in column rear Emergency STOP Automatic tool ejector Forward and reverse turn push buttons Drill guard with microswitch

Optional Equipment: Automatic pitch control tapping with single speed brake motor Automatic pitch control tapping with pneumatic rapid approach Master guide spindle and nut set for automatic pitch control tapping Pneumatic counterbalance with rapid approach and retract Pneumatic counterbalance with rapid approach and retract for tube and profile drilling Pneumatic counterbalance with rapid approach and retract with pitch controlled tapping 50% lower feed range  Mechanical spotface device Pneumatic counterbalance  Multi-spindle head guide rod Union, dragging cone and assembly for multi-spindle head START-STOP and emergency STOP pendent control Pendant control panel with all functions  Cross slide table ISO-40 spindle with quick change nut (models BP-40, 50, 70) ISO-50 spindle with quick change nut (models BP-70 only)