http://www.lighttoolsupply.com/AMMCO-Brake-Lathe
AMMCO Brake Lathe Model 4000B Combination Disc and Drum
AMMCO Brake Lathe Model 4000B Combination Disc and Drum
Combination Lathe for Brake Drums and Rotors, Less Adapters, 110V, 60Hz (Must be Purchased with a Bench Lathe Adapter Kit)
The AMMCO® Model 4000B Combination Disc and Drum Brake Lathe has been professionals' first choice for more than 50 years.
And for good reason. It's simple. It's fast. It's very
precise. AMMCO combination brake lathes support rotors or drums using a
standard one inch arbor. And like all AMMCO brake lathes, it almost
never breaks down. It's no wonder that the 4000B has been a favorite of
brake technicians everywhere since its introduction five decades ago.
Key Features
- Two adjustable spindle speeds (if desired) allow for fast turning of small pieces and high-quality turning of larger pieces.
- Two feed rates allow for quick rough-cut and finer finish-cut settings.
- Forged alloy steel arbor – Two tapered mounting surfaces add stability and handle up to 200 pounds.
- Feed slide protection keeps travel surfaces free of dirt and chips.
- Negative rake tool bits standard, provide lower cost of ownership.
- Solid twin cutter tool simultaneously resurfaces both sides of rotor.
- Full-drum support hex boring bar guarantees correct tool angle for drums.
- Infinitely variable drum feed from 0.002 inches to 0.02 inches per revolution.
- Quick drum-to-rotor changeover.
- User-friendly ergonomics.
- Supports drums or rotors up to 100 pounds using the standard 1-inch (25.4 mm) arbor, or up to 200 pounds using the optional 1.875-inch (47.63 mm) arbor.
- Micrometer-precise depth-of-cut dials embossed in metal and calibrated in both thousandths of an inch and tenths of a millimeter; easy reset to zero.
- Extended spindle increases drum capacity to 9.875 inches.
- Support drums or rotors up to 100 pounds using the standard 1-inch (25.4 mm) arbor, or up to 200 pounds using the optional 1.875-inch (47.63 mm) arbor.
| Weight (lbs) | 406.0000 |
| Volume | High |
| Application | Car & Light Truck |
| Rotors | Yes |
| Drums | Yes |
| Max Rotor Diameter | 14.5" |
| Max Rotor Face Width | 3-3/4" |
| Standard Max Arbor Capacity | 100 lbs. |
| Heavy Duty Max Arbor Capacity | 200 lbs |
| Max Rotor Thickness | 1.875" |
| Flywheel Service Capable | Yes |
| Spindle Bearings | Bronze Sleeve |
| Motor | 1 HP |
| Tool Bits (shipped with) | Negative Rage |
| Double Taper Arbor | Yes |
| Spindle Speed | 100, 200 RPM |
| Drum Feed Rate | .002" to .020"/REV |
| Max Drum Depth | 6.875" |
| Rotor Feed Rate | .002"/.010"/REV |
No comments:
Post a Comment