www.lighttoolsupply.com

Thursday, April 23, 2015

Cuttermaster End Mill Sharpener & Tool Grinder - The Original


Order at Light Tool Supply http://www.lighttoolsupply.com/


Cuttermaster End Mill Sharpener & Tool Grinder - The Original

Product Description

Cuttermaster End Mill Sharpener & Tool Grinder - The Original

Complete with Air Bearing Fixture, Work Area Lighting, 5” Cup Aluminum Oxide Wheel & Air Filter
  • Grinds O.D.s and ends of standard end mills in one setup within just a few minutes.
  • Extremely versatile and is used for much more than just end mills. With the z-axis you get 8 different axes to work with for unlimited versatility.
  • 1 Machine grinds it all end mill, drills, roughing endmill, taps, countersinks, carbide tools, radius end mills, lathe tool bits, various forms tools, reamers, performs gashing and much more.
  • The pneumatic finger instantly and automatically sets primary and secondary clearance angles with the flip of switch.
  • Dials zero out.
  • Air bearing has a 360 degree swivel base for taper grinding.
  • The Jet-Stream air bearing fixture is precision honed and capable of grinding to close tolerances. The spindle sleeve is made from stainless steel and the spindle itself is hard chromed steel.
  • Takes standard 5C collets, with end mill holders available that can hold shank sizes up to 2".
  • Tables are cast 2" iron and precision ground.
  • Motor/spindle assembly tilts to positive and negative angles, cutting tool clearance angles can be adjusted as needed.
  • Grinding chart provides clearance angles for all end mills from 3/16"-3".
  • 1 year warranty against factory defects and workmanship.
Specifications:
Air Bearing Stroke 10.5"
Air Bearing Swing over Table 9.8"
Cutting Tool Capacity 2" shank, 9.8" O.D., 10.5" flute length
T-Slot Dimension .800 x .500 x .670
Table Feed Graduations .001 or .02mm
X-Axis Table Travel 6"
Y-Axis Table Travel 3", plus motor sildes back & forth 6"
X-Axis Table Working Space 16.5" x 5.5"
Y-Axis Travel Working Space 13" x 5.5"
Wheel 5" cup (or 6" dish with Z-axis), 1-1/4" arbor
Motor Tilt +35/-8 degrees
Motor 1/3 HP, 3450 RPM, 110V/60hz or 220V/50hz
Net Weight 180 lbs. / 82 kilos
Gross Weight 232 lbs. / 106 kilos
Machine Dimensions, not includinghandles 21" x 20" x 21"
Shipping Dimensions 30" x 28" x 29"

No comments:

Post a Comment