GENERAL 100:1 ULTRA-HIGH TEMPERATURE INFRARED THERMOMETER

GENERAL 100:1 ULTRA-HIGH TEMPERATURE INFRARED THERMOMETER     $810.00

 Order at Light Tool Supply here http://www.lighttoolsupply.com/IRT5000

GENERAL 100:1 ULTRA-HIGH TEMPERATURE INFRARED THERMOMETER

This rugged, industrial-duty IR Thermometer is designed for those intense– heat applications that off-the-shelf units can’t handle. The IRT5000 measures temperatures up to 4350°F (2400°C) with an accuracy of +/-2%. Its 100:1 spot ratio, enabled by its sophisticated dual laser tracking system allows the user to pinpoint the area to be measured over a great distance. This hi-tech unit provides hi/low temperature alarms and can store up to 24 data points.

Features & Benefits :
• 100:1 distance to spot (D:S) ratio
• Stores up to 24 data points
• Ultra-high temperature operation up to 4352°F(2400°C)
• High/Low alarm levels
• Fast response time of 0.5 seconds
• Min/Max/Dif memory
• Dual lasers to track target/spot size

Specifications :
Distance to Spot (D:S) Ratio: 100:1
Measurement Range:392° to 4352°F (200° to 2400°C)
Measurement Accuracy: ±2% of reading
Measurement Range with “K” TypeThermocouple: -83.2° to 2552°F(-64° to 1400°C)
Accuracy with “K” Type Thermocouple:±1% of reading
Emissivity: Adjustable from 0.10 to 0.95
Battery Life: Approximately 140 hours
Dimensions:2.4 x 8.2 x 9.2 in. (61 x 208 x 234mm)
Weight: 16.8 oz. (475g)
Power Source: 2 “AA” batteries (included)

Includes :
• 1 “K” Type Bead Thermocouple
• Batteries
• User’s manual

INCH DIMENSIONS
Package Specifications = H: 17'' W: 15.5'' D: 5'' Cube: 0.7624 Weight: 123oz Weight: 7.6875lbs
Shelf Pack Specifications = H: 17'' W: 15.5'' D: 5'' Cube: 0.7624 Weight: 123oz Weight: 7.6875lbs

METRIC DIMENSIONS
Package Specifications = H: 431.8mm W: 393.7mm D: 127mm Cube: 19.36496 Weight: 3486.991344375gr Weight: 3.486991344375Kg
Shelf Pack Specifications = H: 431.8mm W: 393.7mm D: 127mm Cube: 19.36496 Weight: 3486.991344375gr Weight: 3.486991344375Kg

 

Earth chain Deburring Machine

Earth chain Deburring Machine

At $27,170.00 

 it is the lowest priced on the Internet and worth every penny.

Order here at    http://www.lighttoolsupply.com

Watch it in action here














Earth chain Deburring Machine

Fast and easy to operate

• Cover bottom of pail with media
• Add parts side-by-side
• Add deburring machine solution until parts and media are covered by 1/4"
• Program speed and time and "Start"
• Strain media from parts when cycle finishes.

Micro Deburring Equipment

The sPINner performs batch deburring on small, precision parts like these without the need for hand deburring …in minutes!

The sPINner deburring machine works best on small, precision parts, made from non-ferrous metals including: aluminum, brass, copper, stainless steel, and titanium. The deburring process will not affect tolerances or damage delicate parts. The sPINner micro deburring process is used in many industries including medical, aerospace, and electronics. It is also a good fit for most parts made on CNC Swiss-type screw machines.

sPINner Micro Deburring Machines

Model No.	Dim. L x W x H	Tank Size L x W	Power	Amps	Weight
EDH-728	19" x 19" x 37"	11" x 11"	220V	5	160 lbs.
EHD-735	23" x 26" x 34"	15" x 16"	220V	10	220 lbs.
EHD-750	29" x 30" x 36"	21" x 23"	220V	15	385 lbs.

All power requirements are single phase.
Standard accessories include: 2 deburring containers, 1 separating container, and 1 manual.
Media and deburring machine solution sold separately.

Stainless Steel Pin Media (SUS 304 with magnetic treatment)

This special stainless steel media is hardened to HRC 30, and will last for years in most applications. To deburr hard materials like stainless steel, steel, etc., use a diameter of media bigger than 0.5mm. Use sizes less than 0.5mm for soft material like brass, copper, aluminum, gold, etc. Choose larger pins for harder material and/or to increase deburring machine's power.
If you want to deburr small holes, choose a diameter of pin media that is smaller than the hole. 3mm length media will work better for small holes and crevices.

Standard Dimension Media (diameter x length in millimeters)
Part No.	EHD-S1	EHD-S2	EHD-S3	EHD-S4	EHD-S5
Size (mm)	0.2X5mm	0.3x5mm	0.4x5mm	0.5x5mm	0.7x5mm
Part No.	EHD-S6	EHD-S7	EHD-S8	EHD-S9
Size (mm)	0.8x5mm	1.0x5mm	1.2x5mm	1.5x5mm

Special Dimension Media (diameter x length in millimeters)
Part No.	EHD-P1	EHD-P2	EHD-P3	EHD-P4	EHD-P5
	0.3X3mm	0.4x3mm	0.5x1mm	0.5x3mm	0.7x3mm
Part No.	EHD-P6	EHD-P7	EHD-P8
Size (mm)	0.8x3mm	1.0x1mm	1.0x3mm

Deburring Machine Solution
Used with all types of materials. Dilute to a 50:1 ratio with water. Other solutions may be used. Call for recommendations.

Model No.	Description
PFS-747	1/2 gallon deburring machine solution

#PRO 3600 digital protractor Lowest on Internet!!!!

The PRO 3600 Digital Protractor 

PRO 3600 digital protractor 

 
Order Here http://www.lighttoolsupply.com/DigitalLevels
Part# 31-038-3    PRO360     $179.99
Part# 31-040-9    PRO3600   $316.93

Digital Protractors

The PRO 360 and PRO 3600 are high performance, angle measurement tools that are sold exclusively through our network of industrial distributors. Both units have a One Year Limited Warranty, CE Certification and National Stock Numbers.* These state-of-the-art, angle measurement tools have features such as "Hold" which lets you to store the last reading taken with a touch of a button. They also have "Alternate Reference" (Alt Zero) which allows you to electronically zero the reading anywhere within the protractor's 360° range. The PRO 3600, in addition to higher resolution (0.01°), has an RS-232 port so you can output the angle measurement data to a computer. Both protractors can be easily fitted with an available, magnetic base or an array of custom attachments.
Applications include:

• Automotive
  • Driveline Measurement
  • Racecar wing & chassis adjustment
  • Wheel alignment
  • Frame straightening
• Aerospace
  • Control surface rigging
  • Prop adjustment
  • Fire control elevation
  • Rotor angle measurement
  • Aircraft leveling
• Industrial
  • Machine tool set up
  • Lathe and mill alignment
  • Quality Assurance verification
• Medical
  • Range of motion measurement

* The National Stock Number (NSN) for the PRO 360 is #5220012512120 and the PRO 3600 is #5210014180671.

Product Listing:

• PRO 360
• PRO 3600

PRO 360

• Full 360 degree range (90° x 4)
• Easy to read LCD display which intelligently flips over when the unit is upside down.
• Maximum accuracy of +/- 0.1° and maximum resolution of 0. 1°
• Precision, machined aluminum frame.
• Unit can be recalibrated to factory accuracy in the field without special tools or fixtures.

The PRO 360 Digital Protractor $179.99 is a revolutionary measuring tool that provides an immediate, digital reading of all angles in a 360° range. The unit utilizes a patented, liquid-filled sensor combined with precision measurement circuitry to provide unparalleled accuracy and stability.
A precision machined aluminum frame provides a rigid, lightweight, ultra-precise platform for extremely accurate measurements. The frame is grooved along the bottom surface to facilitate use with round objects such as pipes or shafts and incorporates threaded holes on the bottom for rigid attachment if desired.
The front panel buttons can be used to capture desired readings or to designate an alternate reference surface from which subsequent angles are then measured. The unit can also be easily recalibrated in the field to factory accuracy using any available flat surface.
The unit operates for up to 500 hours on a single 9V battery, incorporates an automatic power down feature, and ships standard with a rigid plastic case.
Typical applications include:

• Drive shaft alignment
• Aircraft flap calibration
• Setup of precision machines
• Road or rail-track layout
• Satellite or aerial alignment

PRO 3600

• Full 360 degree range (90° x 4).
• Easy to read LCD display.
• Maximum accuracy of +/- 0.05° and maximum resolution of 0.01°
• Precision, machined aluminum frame.
• Unit can be recalibrated to factory accuracy in the field without special tools or fixtures.
• RS-232 compatible interface for computer data collection.

The PRO 3600 Digital Protractor $316.93 is a revolutionary measuring tool that provides an immediate, digital reading of all angles in a 360? range. The unit utilizes a patented, liquid-filled sensor combined with precision measurement circuitry to provide unparalleled accuracy and stability.
A precision machined aluminum frame provides a rigid, lightweight, ultra-precise platform for extremely accurate measurements. The frame is grooved along the bottom surface to facilitate use with round objects such as pipes or shafts and incorporates threaded holes on the bottom for rigid attachment if desired.
The front panel buttons can be used to capture desired readings or to designate an alternate reference surface from which subsequent angles are then measured. The unit can also be easily recalibrated in the field to factory accuracy using any available flat surface.
The PRO 3600 features an RS-232 compatible serial interface for transmission of angle measurement data to a computer or other equipment. The unit operates for up to 500 hours on a single 9V battery, incorporates an automatic power down feature, and ships standard with a rigid plastic case.
Additional information about interfacing to the PRO 3600 Digital Protractor is available in Application Note AN-202: Interfacing to a PRO 3600 Digital Protractor (see link below).

Electrix is committed to fine Craftsmanship and Customer Satisfaction.

For 45 years, the name Electrix has been synonymous with quality lighting.

To purchase click below
http://www.lighttoolsupply.com







  For 45 years, the name Electrix has been synonymous with quality lighting. We have been manufacturing lighting fixtures since 1962 and first became involved with architectural luminaires during the 1980's when we started building functional lighting as a part of architecture.
Our design features have always been influenced by the Scandinavian and European creative contributors of our in-house design staff. Over the years, Electrix has built a reputation for successfully collaborating with architects, designers, lighting consultants and engineers resulting in numerous quality lighting design solutions.



Electrix is committed to fine Craftsmanship and
Customer Satisfaction.

Electrix products are designed, built and performance tested to the highest standards at our factory. From concept, to component and material selection, to production, our product quality and your project are our first priority. UL and CUL listings ensure electrical safety and adherence to codes.

Our team of sales professionals offers comprehensive product knowledge and application assistance. We work closely with our sales representatives and specifiers to ensure competitive pricing and timely product delivery. Electrix is committed to satisfying you, the specifier. Our product range is diverse and our broad custom capabilities help to meet your architectural lighting requirements.



Electrix is a fully integrated manufacturing facility. Our products are developed using state of the art CAD/CAM software and built in our manufacturing facilities in New Haven, CT. Superior design, engineering and manufacturing all contribute to building and manufacturing innovative lighting fixtures reflecting your style and design imagination. We welcome the opportunity to help develop your custom fixtures.




Halogen Inspection Lamp with 3-Diopter Magnifier Lens with Base

Model 7310 [ halogen ]

Halogen Inspection Lamp with 3-Diopter Magnifier Lens with Base

[ standard features ]
• 3-Diopter Magnifying Lens (1.75 times magnification, 13" focal length, 5" viewing area )
• 22" long flexible lamp reach
• 14" reach magnifier
• 50 watt low voltage Halogen bulb
• 4" diameter shade - all metal construction
• UVB filter enclosure
• Integrated 12V transformer in 7"

Posted by Light Tool Supply at 10:09 AM 0 comments Links to this post

Baileigh CNC Plasma Cutting Table PT-510VH-60

#Baileigh CNC #Plasma Cutting #Table PT-510VH-60

Order at Light Tool Supply

http://www.lighttoolsupply.com/Plasmatable

Baileigh CNC Plasma Cutting Table PT-510VH-60

Features:

The PT-510VH-60 CNC plasma table can cut a 5’ X 10’ plate of steel up to 5/8” thick and up to 3/8” steel plate at full production speed. This cnc plasma machine comes standard with a heavy duty 60 Amp Thermo Dynamics® plasma cutting system that requires 220 volts of single phase power so it can work in virtually any fabrication shop.
The PT-510VH-60 CNC plasma cutting table comes standard with a ruggedly constructed square and rectangle box frame, built to easily handle the weights of loading the machine at maximum capacity (note: the machine was built to easily handle a 1” thick piece of steel plate that is 5’ X 10’). The machine is so well built that it weighs in at an impressive 3520 lbs of heavy steel construction. The table includes a powerful downdraft system, an ample water reservoir, and water jet system that works in conjunction with the plasma arc to keep the part cool and clean after being cut. Like all Baileigh CNC plasma tables it comes pre-built so there is minimal assembly required, noting that this is a serious industrial machine and not a kit model like other hobby machines on the market.
This CNC plasma cutting table comes standard with our easy to use design software that can be loaded into any basic PC and downloaded via an included communication wire or remotely by USB stick. A sturdy operation control station includes basic stop, start, and run functions as well as includes a large operator control console screen with key pad controls. This CNC plasma machine can run any program designed by the software and controls the X, Y & Z axis. The Z axis is the automatic plasma height allowing for perfect arc distance at all times even on uneven materials, making each cut perfect, every time.
The PT-510VH-60 CNC plasma table has an industrial grade gantry travel system for the X, Y & Z axis that rides on heavy Thomson shafts with needle bearing shuttles that use wiper dies to keep the welding dust out of the bearing for a smooth transfer without any chatter. Movement of the gantry is driven by Panasonic® servo bushless motors that are controlled by Panasonic® servo motion controllers so the machine is dead on accurate compared to other models that use simple step motor designs.
Like all Baileigh CNC plasma cutting tables the PT-510VH-60 is an industrial grade plasma table that will provide the fabrication shop with decades of profitable use.

Haimer Zero Master

Order here  http://www.lighttoolsupply.com/Haimer/zeromaster

Haimer Zero Master

Small but nice
The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.

The Zero Master can be equipped with a short (ball diam. 4 mm) and a long (ball diam. 8 mm) probe tip. The probe tips of course are compatible to all other Haimer 3D-Sensors.

Please take note:
The given measuring precision of 0.01 mm only applies if the original Haimer probe tips are used.