Top Tech Milling and Drilling Machine

• http://www.lighttoolsupply.com

Tuesday, March 2, 2010

Top Tech DM-45

Top Tech Milling and Drilling Machine - $1395

Sold through http://www.lighttoolsupply.com

Item is located in Maplewood NJ and can be picked up.

Geared Head Mill/Drill Dovetail Column - Swivel Head 90°
Milling, drilling, tapping, boring, reaming.
Capacity, cast iron: 1-9/16", mild steel: 1-1/4".
Massive 3" diameter quill.
Zero setting dials.
Full 5" spindle stroke.
21" swing.
Head tilt 90 degrees right and left.
Forward/reverse switch.
Zinc alloy handle wheels.
Fine downfeed calibrated.

Specifications:
Face mill capacity: 3"
Swing: 21"
Max.distance:
Spindle to table: 18-1/2"
Spindle to taper: R-8
Spindle stroke 5"
Table size: 32" x 9-1/2"
Table travel: 20" x 9"
Quill diameter: 3"
Spindle speeds: (6)75-1600 RPM
T-slot size: 5/8"
Motor: 1 HP, 110/220 1 Ph
Weight: 750 Lbs

Quote of the Day

"I want to know God's thoughts; the rest are details."
— Albert Einstein: Was an American theoretical physicist and Nobel Prize winner

Temperature Compensation - It's time is here

Temperature Compensation  -

It's time is here

Temperature variation is one of the most significant sources of gaging error.  As manufacturing tolerances get tighter and the margin for gaging error gets smaller, it becomes an issue that must be addressed.
Most materials expand as they heat up.  For every inch of steel, a 1°F increase causes expansion of approximately 6µ".  For brass and copper, the figure is 9µ", and for aluminum, 13µ".  If the objective of the inspection process is to determine a part's true size, its temperature must be known.  Based on the ISO's very first standard (ISO 1 issued in 1931) that temperature is automatically assumed to be 68°F (20°C).
But few inspection processes monitor, much less attempt to control, workpiece temperature.  Many quality managers assume that any thermally induced variation in the part will be matched by like variation in the gage and the master: everything will expand and contract at the same rate, and everything will work out just fine.
This is far from true.  Gage, master, and part—the three hardware "components" of a gaging system—may be of different materials, so the effects of thermal expansion will differ even if they're all at the same temperature.  And the components won't necessarily be the same temperature.  Parts that have recently come off a dry machining process may be several degrees warmer, and may remain so for hours.  Parts machined under coolant may be cooler.  The gage or the master might be sitting on a bench in direct sunlight, or under a heating or cooling vent.  Temperature stratification within a room may create temperature differences between components placed near the floor, and components placed on a high shelf.  The relative masses of the components may make a difference.  For example, an engine block may take longer to reach equilibrium with ambient temperature than a bore gage.  And in some instances, thermal variation may work in opposite directions for the gage and the workpiece, compounding rather than canceling the error.  For example, high temperatures will cause bore gage contacts to grow longer, which will naturally result in ID measurements that are smaller than actual.  On the other hand, the ID of a thin-walled part, like a bearing shell, will grow larger with higher temperatures. To read the remainder of this article "click here"

Millimar Inductive Probes

The requirements for electrical length measuring instruments are almost as broad as their scope of application. Reliability, precision and simple operation are the major demands. Millimar bench amplifiers and column measuring instruments fulfill all these demands and requirements.  Millimar probes are the most influential components of a measurement process. Their characteristics determine the quality of the entire measurement. Depending upon the type of application Mahr Federal has the right probe for your requirements. For example, Millimar Inductive Probes are robust, versatile and provide high value for their cost while Millimar Incremental Probes are ideal for long range measurement applications becasue they provide high linearity over their entire measuring range. 

• Available for most common amplifier systems (Mahr, Mahr-Federal, Tesa, Marposs)
• Wide product spectrum; measuring ranges from 1 to 10 mm plus models with a compressed air (pneumatic) lifter or with vacuum retraction
• With rotary stroke bearings
• High linearity over the total measuring range
• Excellent electromagnetic shielding (EMC)
• Most probes can be easily converted from axial to radial by mounting a slip on cap, included in the scope of supply.

To download more information about Inductive Probes  "click here".

Light Tool Supply

About Us

Michael Elson 
President 
Light Tool Supply

For as long as I can remember, I have been surrounded by tools. As a young boy I worked summers packing orders and unloading trucks at my father's tool and supply company. After graduating from college, I immediately went to work full-time for my father and have been in this industry ever since.  Over the years I have learned this business inside and out and have spent many hours using that knowledge to improve the mail order supply business. I have seen that business change drastically over the years. The most dramatic change is from a business based on the paper catalog to one based on products sold via the internet. Subsequently, after many years of experience, I decided to create my own company to do what I know best. Light Tool Supply is now quickly bringing tools to loyal customers at the best prices possible.  I encourage you to use our vast experience as a resource for all your tooling needs.  If you see something on our website that you do not feel is the best price, please feel free to email me directly at michael@lighttoolsupply.com.  I also would like you to email me or my staff with any manufacturer's Part# from our long list of vendors at the bottom of this page for a low price quote. Additionally, do not hesitate to contact Light Tool Supply with any of our competitors' part numbers. It would be my pleasure to cross reference those part numbers with ours and beat their prices! I realize there are many companies to choose from; I hope you will choose Light Tool Supply.

Thank you,
Michael Elson
President
Light Tool Supply

                                                                        
Picture-Michael Elson, President of Light Tool Supply working in machine shop. (Picture taken Maplewood NJ 1994)

 Picture-Michael Elson, President of Light Tool Supply visits Mitutoyo Office in Germany (Picture taken in Germany 1994)

Picture-My Father, Gene Elson. Current President and Founder of Penn Tool Co. Inc. (Picture taken Newark NJ 1967)

                                                                             
Picture-My Mother, Phyllis Elson, working at an Industry Trade Show 1972





What is the warranty on your tools?
Most of the warranties are by the mfg and are for one year. Some are more or less than one year depending on the mfg. Please inquire on length of warranty before you purchase if concerned.

Do you Ship Outside the United States?
Yes. Light Tool Supply is happy to ship outside the U.S. You can contact us prior to ordering or simply place the order online and we will get back to you. We have found that small light packages(under 5 pounds) can be shipped very economically through USPS or DHL. For questions contact info@lighttoolsupply.com

Who pays for duties and taxes on International Orders?
The customer has to pay the duties and taxes to the delivery company upon receiving the order. These fees are not included in the shipping charge billed by Light Tool Co. These fees are individually determined by your government. If you would like more information please email info@lighttoolsupply.com

How do I calculate shipping?
Most shipping is calculated automatically before you finish paying for your order. In the case of items that are over 150 lbs and must go by truck, shipping is also calculated automatically. However we may need to contact you about additional charges such as residential delivery and Liftgate Truck Charge. We can also ship truck shipments to your local Truck Terminal for you to pick up. For inquires email info@lighttoolsupply.com

What do I do if I receive an order damaged?
Please take extra care to make sure the box or pallet (truck shipments) is delivered in good condition before you sign for it. Light Tool Supply can not accept responsibility for damaged items you sign for in good condition. 

Rong Fu Machinery Quality Machinery from Taiwan

Order the Rong Fu Milling Machine at Light Tool Supply.

Taiwan Rong Fu was founded in 1975 with a work-force of ten people turning out vises. By 1979 we were also producing 4-1/2" metal cutting band saw and milling/drilling machines for the domestic and overseas markets. Taiwan Rong Fu was rated number one in Taiwan in the export of band saws and milling and drilling machines.
In 1984 we cooperated with two large US makers to develop 7" x 12" and 8" x 14" bench-model metal cutting band saws. Over the next decade we achieved an enviable record of other firsts and breakthroughs. In the same year we initiated implementation of a fully-computerized production management system
By 1985 we had completely overhauled and upgraded our production facilities and received listing by UL of the United States for our products. In 1989 our computerized management system was extended to include all operations, and the following year we began preparation for ISO 9000 with training of all employees. We also invested in new production equipment for air tools.
In 1992 we began working with the Industrial Research Technology Institute to improve our manufacturing processes. Our certification for ISO 9002 was received in 1993, and over the next several years we concentrated on expanding production and gaining CE approval for all of our products and CSA and UL listing for a number of products.


In 1999 Taiwan Rong Fu successfully introduced our band saw and mill/drill products to the European market. During the following years we began OEM production of both items in cooperation with world well known European manufacturers.
Year 2000, we were certified for ISO 9001, same year with 921 earthquake. But with minor damage, we came back for shipping in one week.
In 2001, is a remarkable year of developing new RF-32, RF-43/205S, RF-914H, CNC VMC; and the OEM business with European manufacturers in band saw and drilling machine.
In 2002, start bringing band saw into Chinese market. Develop JFC-330S, RF-085, 150, 210, 270 band saws.
In 2003, develop variable speed function for mill/drill, and more of OEM business with European manufacturer. Invest sporting goods business.
In 2004 ~ 2005, obtained CUS certificate for most our items, and more of certificate for CE machines.
In 2006, move into 3 in 1 factory. Develop RF-125, 150, 916S/SV, 1018S/SV, and automatic band saw.
In 2007, Develop RF-331, 335SRV, 1018SRV. Qingdao production begins, and direct export shipment started. ERP system generates.

Offical Launch of the Baleigh Industrial TN-250 tube notcher

TN-250 Tubing Notcher

This is the most revolutionary hole saw tube notcher on the market and is perfect for chassis, roll cages, and much more. The heart of this machine is the unique design of the self centering capture vise that allows the ability to clamp onto bent tubes in any direction. This is the only hole saw tubing notcher that is always centered left to right and up and down.
This coping machine is constructed of heavy steel plate to reduce vibration, uses a 1-1/4” Thompson® shaft that rides in a sealed needle bearing for longevity of the machine and hole saw. The TN-250 tube notchers vise has a powerful screw with a built in hand wheel that opens and closes the unique six radial clamping jaws. This totally unique design to Baileigh tubing notchers easily allows for securely clamping and notching on a bend or straight of tubing.
The TN-250 tube notcher can notch up to 2-1/2” OD and allows for steep angles as the hole saw can pivot up to 230 degrees making it the most versatile notching machine on the market. This tubing notcher can easily offset in seconds for off center notches and does not require crazy shims or spacers common on inferior models.
To further compliment the experience of this revolutionary tube notcher the Thompson® shaft has a replaceable hex insert for drill connection, that saves the main arbor shaft. A large degree plate is included with a very visible pointer for exact degree angles every time. This tubing notcher has a fully adjustable axis to accommodate almost any notch combination considering the pivot moves left to right up to 230 degrees, there are two slotted mounting rails for almost any position of the bearing block, and finally we have the easily adjusted position for up and down.

All in all, Baileigh’s TN-250 tubing notcher offers the most revolutionary design, quality construction and function of any other vise or table mounted hole saw tube notcher on the market for a reasonable investment. For further information on this notching machine please call a Baileigh representative.

SPI PRO TRONIC Digital Level PRO 360 and PRO 3600 on Sale

 

• http://www.lighttoolsupply.com 
• Made in U.S.A.
• The SPI TRONIC PRO 360 is a revolutionary angle measuring tool.
• Multi-functional. Digital Level, 360° Protractor and Inclinometer.
• Instant LCD display of level, tilt, true vertical or any angle in between to highest accuracy, one tenth of a degree reading.
• Use upside down, display reverses to right side up.
• Deviation from the true plane is measurable through full 360° (4x90°).
• Floating zero! Provides zero selection anywhere within its 360° range.
• Hold button freeze! Displays reading for convenient out of sight measurements.
• Reset plus Superset self-calibration modes.
• High-impact machined aluminum frame houses a rugged electronic sensor, custom circuitry and the liquid crystal display.
• Baseplate has V-groove for accurate registration on curved or cylindrical surfaces.
• Tapped #6-32 holes in baseplate for special mountings.
• Operates on standard 9V Alkaline battery for up to 250 hours of operation. Battery included.
• Low battery indicator. Automatic shutoff. 
• SPECIFICATIONS
  
  
  
  

  Measuring Range:	360° (4x90°)
  Resolution:	0.1°
  Accuracy:	0-10° ±0.1°
  	11-79° ±0.2°
  	80-90°±0.1
  Repeatability:	Same as accuracy
  Cross Axis Error:	<.02° up to 20°
  Operating Temperature Range:	-5° to +50° C
  Storage Temperature Range:	-20° to +65°C
  Size:	6.0 x 1.2 x 1.9 high
  Weight:	10.2 oz.

   

PRO 3600

Multi functional level, protractor and inclinometer.

Measures full 360º, 0º to 90º in each quadrant, with standard counter clockwise rotation.

Large clear LCD display instantly shows level, true vertical and any angle between.

Additional features include a hold button freeze for convient out of sight measurements, a v-groove on the top plate for accurate registration on curved or cylindrical surfaces and tapped No, 6 -32 holes in base for plate for special mountings.

reset plus Superset self calibration modes.

Uses standard 9V alkaline battery (included).

Plastic case included.

Note: *Foot switch (31-041-7) - Connects to a computer for statistical process control and allows reading to be sent when foot switch is depressed. Includes foot switch, 9 pin female connector with a 4' cable and 8' cable that connects to the level. Please inquire for custom cable lengths.

http://www.lighttoolsupply.com/PRO3600Level