Friday, December 14, 2012
#Mechanix #Wear® #Gloves
Order Mechanix Wear® Gloves at http://www.lighttoolsupply.com/Mechanix-Wear
U.S. #Manufacturing #Rebounds #Post #Sandy
U.S. Manufacturing Rebounds Post Sandy
U.S. factory output posted its sharpest increase in nearly a year in
November as auto production staged a rebound, while consumer prices
slipped, offering cautious optimism for the struggling economic
recovery.
A separate report on Friday bolstered the view that a slowdown in manufacturing may have run its course. Factories have bounced back after being held down by Superstorm Sandy, which struck the East Coast in late October.
Despite last month's rise, factory production remained below highs reached earlier this year. Analysts said this subdued recovery and tame price pressures provide ample scope for the Federal Reserve to stay on its ultra-easy monetary policy path.
"This is an economy that still has a lot of slack and upside potential," said Robert Dye, chief economist at Comerica in Dallas. "There is a lot of dry tinder out there, the Fed has added to that with monetary policy and we have to get past the fiscal cliff issues to see if the dry tinder catches fire."
The fiscal cliff refers to the $600 billion in deep government spending cuts and tax hikes that will hit the economy next year if the Obama administration and Congress fail to agree on a less drastic plan to reduce budget deficits.
Manufacturing output rose 1.1 percent in November, the biggest gain since December 2011 and a rebound from a 1.0 percent drop in the prior month, the Fed said. It said production was lifted by a surge in motor vehicle output.
Sandy had weighed on overall industrial output in October, but the snapback in November was stronger than economists had expected. Output at the nation's factories, mines and utilities taken together also jumped 1.1 percent after slumping 0.7 percent in October. It was the biggest gain in almost two years.
Published December 14, 2012
Reuters
A separate report on Friday bolstered the view that a slowdown in manufacturing may have run its course. Factories have bounced back after being held down by Superstorm Sandy, which struck the East Coast in late October.
Despite last month's rise, factory production remained below highs reached earlier this year. Analysts said this subdued recovery and tame price pressures provide ample scope for the Federal Reserve to stay on its ultra-easy monetary policy path.
"This is an economy that still has a lot of slack and upside potential," said Robert Dye, chief economist at Comerica in Dallas. "There is a lot of dry tinder out there, the Fed has added to that with monetary policy and we have to get past the fiscal cliff issues to see if the dry tinder catches fire."
The fiscal cliff refers to the $600 billion in deep government spending cuts and tax hikes that will hit the economy next year if the Obama administration and Congress fail to agree on a less drastic plan to reduce budget deficits.
Manufacturing output rose 1.1 percent in November, the biggest gain since December 2011 and a rebound from a 1.0 percent drop in the prior month, the Fed said. It said production was lifted by a surge in motor vehicle output.
Sandy had weighed on overall industrial output in October, but the snapback in November was stronger than economists had expected. Output at the nation's factories, mines and utilities taken together also jumped 1.1 percent after slumping 0.7 percent in October. It was the biggest gain in almost two years.
Wednesday, October 24, 2012
#Cyclone 4040 #Blast #Cabine
#Cyclone 4040 Full Top & Side Door Opening #Blast #Cabinet
Order at http://www.lighttoolsupply.com
Cyclone 4040 Full Top & Side Door Opening Blast Cabinet
Click Here for Cyclone Abrasive Blasting Media.
Features and Specifications:
| Overall Dimensions: | 66" (h) x 43" (w) x 62" (d) |
| Working Dimensions: | 30" (h) x 39" (w) x 40" (d) |
| Side Door: | 18" x 28" |
| Window: | 25" x 10" |
| Construction: | 16 gauge steel |
| Gun Assembly: | Foot operated: 14 CFM @ 90-100 PSI |
| Electrical: | 110 Volts |
| Dust Collector: | DC1500 |
| Weight: | 345 lbs. (common carrier) |
#Baileigh #Industrial
#Baileigh #Industrial®, Inc. is an international provider of quality industrial metal and woodworking machinery that is distributed primarily in North, Central, and South America, Eastern and Western Europe, and the South Pacific Rim. We have professional central distribution facilities located in the United States, United Kingdom, Germany, and Australia to insure the Industries most reliable deliveries and services. Baileigh has grown to be one of the most respected companies in the industry due to consistency in deliveries, high quality machinery, and solid support during and after the sale! Our products can be purchased through a large industrial distributor network with local ties to most regions. For additional information about Baileigh Industrial®, Inc. and our quality lines of profitable metal and wood working machinery, please click on your desired website location below.
http://www.lighttoolsupply.com/catalog/Baileigh
Build Your Passions with #Baileigh #Machines
http://www.lighttoolsupply.com/Baileigh-Power-Hammer-MH-19
Baileigh Industrial is an international provider of quality metal machinery. Our proven industry leadership results in profitable solutions for your fabricating needs. You can rely on our global experience, our in-depth expertise, and our unwavering commitment to your absolute satisfaction.
#Mechanix Wear® Gloves
Mechanix Wear® Gloves
Order #Mechanix Wear® Gloves at http://www.lighttoolsupply.comBack in 1991, we knew right away we had a good thing going with Mechanix Wear® Gloves. We had no idea what kind of revolution we would start. From the first use of Mechanix Wear® “Original” Gloves by pit crew teams at the Daytona 500, Mechanix Wear® gloves have been the leader in the high performance work glove market. Before we knew it, we had 41 NASCAR® teams asking for our gloves along with just about every other high profile motorsports team in every type of racing!
As a result of the exposure, everyday mechanics, technicians, construction workers, Do-It-Yourselfers, industrial safety, emergency services, and military professionals all benefit from our products.
Every #Mechanix Wear® product represents a total commitment to its intended use. We consider everything: fit, feel, function, durability, quality, style and value. There is a lot of dedication and pride in everything we do, and it all adds up to superior performing products for you, our valued customer.
Whether you’re jumping the pit wall at Daytona or just doing a little tune up in the garage, you can have complete confidence that Mechanix Wear® products offer you the best protection in the industry. Mechanix Wear® gloves are for more than just racing, they are for toolboxes everywhere.
Since our inception in 1991, Mechanix Wear has worked closely with nearly every NASCAR team, developing gloves and other products to significantly improve the safety and performance of pit crews. Through this close interaction, Mechanix Wear learned how much work and training goes into a successful pit crew. We soon realized that these crews deserve an annual award to recognize the huge role that a pit crew plays in the success of their race team at the track.
At the beginning of the 2002 NASCAR season, we created and launched the Mechanix Wear Most Valuable Pit Crew (MVPC) Award. During the racing season, a different crew is selected each quarter as a semi-finalist. At the end of the season, one of the four semi-finalists is chosen as the winner of the award.
To judge the contest each year, Mechanix Wear enlists the help of the NASCAR Sprint Cup Series crew chiefs. It is our preference to have the MVPC winners selected on consistent performance under all conditions that also factors in race strategy, car repairs and adjustments, weather, and all of the variables thrown at a crew during race day. We believe the crew chiefs are the most qualified people in the sport to analyze these variables and determine the most valuable crew. On a quarterly basis and at the end of the season, we ask the crew chiefs to vote for the pit crew who contributes the most to the success of their team on race day.
Going into its ninth year, the Mechanix Wear MVPC Award is the longest running and most coveted pit crew award in NASCAR and has gained tremendous respect on pit road. Any team displaying the Mechanix Wear contingency decal on the front fender of their race car is eligible to win. Nearly every team competes in the contest each year, giving the Mechanix Wear MVPC Award one of the highest levels of participation of any annual NASCAR award.
Each quarterly winner during the 2011 season will receive $5000 and recognition during pre-race ceremonies. The winning crew at the end of the season will win $100,000 and an all expenses paid trip to the NASCAR Awards Ceremony this December in Las Vegas to accept their award.
MECHANIX WEAR MOST VALUABLE PIT CREW AWARD Past WINNERS
2010
Joe Gibbs Racing #11 PIT CREW
2009
EARNHARDT GANASSI RACING #42 PIT CREW
2008
Hendrick Motorsports #48 Pit Crew
2007
Hendrick Motorsports #48 Pit Crew
2006
Richard Childress Racing #31 Pit Crew
2005
Joe Gibbs Racing #20 Pit Crew
2004
Hendrick Motorsports #48 Pit Crew
2003
Roush Racing #17 Pit Crew
Tuesday, April 24, 2012
Good News for U.S. Manufacturing
Boeing Beats the Street, Lifts '12 Guidance
Published October 24, 2012
FOXBusiness
____________________________________
Boeing (BA)
disclosed a 6% dip in third-quarter profits on Wednesday due to higher
pension expenses, but the defense and aerospace titan managed to beat
Wall Street’s expectations and also raised its full-year guidance.
The markets cheered Boeing’s better-than-expected results and new outlook, bidding the blue-chip company’s shares nearly 3% higher in premarket trading.
Chicago-based Boeing said it earned $1.03 billion, or $1.35 a share, last quarter, compared with a profit of $1.1 billion, or $1.46 a share, a year earlier. Analysts had been calling for EPS of just $1.13.
Revenue jumped 13% to $20.01 billion, essentially matching the Street’s view of $20.03 billion. Operating margins shrank to 7.8% from 9.7%.
Boeing’s total backlog grew to $378 billion from $374 billion at the start of the quarter, driven by net orders of $24 billion. By comparison, the company posted net orders of $13 billion in the second quarter.
“Strong core operating performance drove increased earnings in both our major businesses, along with higher overall revenues, improved cash flow, and solid earnings per share even as pension headwinds rose," CEO Jim McNerney said in a statement.
The company’s commercial airplanes division generated a 28% increase in third-quarter revenue to $12.2 billion. Deliveries rose 17% year-over-year to 149 airplanes.
Boeing said its defense, space and security sales slipped 4% to $7.84 billion, driven by a 12% tumble in network and space systems revenue to $1.99 billion. While military aircraft sales declined 4% to $3.79 billion, global services and support revenue gained 5%.
"Our Defense, Space & Security business maintained double-digit margins in a challenging environment while Commercial Airplanes continued to build momentum with 787 deliveries and 737 MAX orders,” said McNerney.
Looking ahead, Boeing upped its 2012 EPS view to $4.80 to $4.95 from $4.40 to $4.60 previously. Even the low end of the new range would beat the Street’s view of $4.73.
Management now expects to generate full-year revenue of $80.5 billion to $82 billion, up from $79.5 billion to $81.5 billion earlier. Analysts had been calling for sales of $80.65 billion.
Shares of Boeing rallied 2.69% to $74.78 ahead of the opening bell, putting them on pace to erase their 2012 decline of around 1%.
The markets cheered Boeing’s better-than-expected results and new outlook, bidding the blue-chip company’s shares nearly 3% higher in premarket trading.
Chicago-based Boeing said it earned $1.03 billion, or $1.35 a share, last quarter, compared with a profit of $1.1 billion, or $1.46 a share, a year earlier. Analysts had been calling for EPS of just $1.13.
Revenue jumped 13% to $20.01 billion, essentially matching the Street’s view of $20.03 billion. Operating margins shrank to 7.8% from 9.7%.
Boeing’s total backlog grew to $378 billion from $374 billion at the start of the quarter, driven by net orders of $24 billion. By comparison, the company posted net orders of $13 billion in the second quarter.
“Strong core operating performance drove increased earnings in both our major businesses, along with higher overall revenues, improved cash flow, and solid earnings per share even as pension headwinds rose," CEO Jim McNerney said in a statement.
The company’s commercial airplanes division generated a 28% increase in third-quarter revenue to $12.2 billion. Deliveries rose 17% year-over-year to 149 airplanes.
Boeing said its defense, space and security sales slipped 4% to $7.84 billion, driven by a 12% tumble in network and space systems revenue to $1.99 billion. While military aircraft sales declined 4% to $3.79 billion, global services and support revenue gained 5%.
"Our Defense, Space & Security business maintained double-digit margins in a challenging environment while Commercial Airplanes continued to build momentum with 787 deliveries and 737 MAX orders,” said McNerney.
Looking ahead, Boeing upped its 2012 EPS view to $4.80 to $4.95 from $4.40 to $4.60 previously. Even the low end of the new range would beat the Street’s view of $4.73.
Management now expects to generate full-year revenue of $80.5 billion to $82 billion, up from $79.5 billion to $81.5 billion earlier. Analysts had been calling for sales of $80.65 billion.
Shares of Boeing rallied 2.69% to $74.78 ahead of the opening bell, putting them on pace to erase their 2012 decline of around 1%.
Monday, October 22, 2012
#Caterpillar Profit Jumps 50% on Strong Sales
#Caterpillar Profit Jumps 50% on Strong Sales
Published October 22, 2012
Reuters
Caterpillar Inc (CAT),
the world's largest maker of tractors and excavators, said on Monday
its quarterly profit rose nearly 50% due in part to higher sales in the
United States and price increases.
For the third quarter, the company posted profit of $1.7 billion, or $2.54 per share, compared with $1.14 billion, or $1.71 per share, in the year-ago period.
Revenue rose 5% to $16.45 billion.
For the third quarter, the company posted profit of $1.7 billion, or $2.54 per share, compared with $1.14 billion, or $1.71 per share, in the year-ago period.
Revenue rose 5% to $16.45 billion.
Monday, October 8, 2012
Baileigh Industrial #Mitering Bandsaw
Baileigh Horizontal & Vertical Mitering Bandsaws BS-712MS
#Baileigh
Horizontal & Vertical Mitering #Bandsaws #BS-712MS
Order here
Horizontal and Vertical Band Saw
This bandsaws head, pivot mechanism and vise base are constructed of the highest quality cast iron. It's saw head can operate in a vertical or horizontal mode offering more bang for the buck. All BS-712 bandsaws come with a solid three speed direct drive gear transmission that extends blade life.The BS-712MS band saw has a swivel head that allows the entire bow to miter up to 45 degrees. The blade guides consist of six hardened roller bearings to ensure straight cuts. The band saw is on a well constructed cart with wheels that allows the user to take it to job sites or push it out of the way if space is required. Perfect for the home or small shop.
Baileigh bandsaws are made to some of the highest quality standards on the market.
Specifications
Capacity Round (90/45deg)
7”/4.33”
Capacity Rectangular (90/45deg)
7”x10.23”/4.72”x4.13”
Blade Size (H/W/L)
.75” / .035” / 92.91”
Blade speed (fpm)
125/215/270
Blade Guide
Roller
Miter Angle
0 – 45 deg
Miter Adjustment
Swivel Head
Table Height
23”
Descent Control
Hydraulic
Return
Manual
Drive
Gear
Motor
1 hp
Power Requirement
110v / 220v, 1 phase
Shipping Dimensions (L/W/H)
51” / 23” / 43”
Shipping Weight
397 lbs
#Mitutoyo #MyCAL Digital #Caliper 6". Our most popular seller!!!
Order today at Light Tool Supply
http://www.lighttoolsupply.com/catalog//Mitutoyo-MyCAL-Digital-Caliper
| ABSOLUTE #Digimatic #Caliper Series 500-with Exclusive ABSOLUTE Encode Technology Series 500 | ||
FEATURES:
Accuracy: Refer to the list of specifications Resolution: 0.01mm or .0005"/0.01mm Repeatability: 0.01mm / .0005” Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), 938882 Battery life: Approx. 3.5 years under normal use Function Origin-set, Zero-setting, Data output, inch/mm conversion (inch/mm models ONLY) Alarm: Low voltage, Counting value composition error | ||
Friday, October 5, 2012
#Baileigh #Manual #Tube #Bender
Baileigh #RDB-10 Manual Tube Bender
Baileigh RDB-10 Manual Tube Bender
Order at http://www.lighttoolsupply.com/
RDB-10 Rotary Draw Manual Tube Bender
Hand Tube Bender - Manual Bender Features
The RDB-10 manual hand tube bender is the perfect bending machine for bending air lines, brake lines, fuel lines, and general hydraulic lines. Thus, if you’re into building or repairing race cars, auto and airplane repair or restoration, an automated machinery builder, or much more, the RDB-10 manual bender will save you time and money from the moment you use it.
shimon bar yochai
This manual tube bender comes standard with 10 different size combinations from 1/4” to 5/8” OD in either 3 or 5 times the diameter radiuses. This manual tube bender works great with mild steel, certain coppers and aluminums, as well as stainless steel. It comes standard with a heavy pedestal, tooling rack, and bending machine.
The RDB-10 hand bender is easy to use and can bend tubing up to 180 degrees. Because of the design, this bending machine can do serpentine bends with ease at very tight radiuses depending on the OD, material and wall thickness.
Specifications:
Hand Tube Bender - Manual Bender Features
The RDB-10 manual hand tube bender is the perfect bending machine for bending air lines, brake lines, fuel lines, and general hydraulic lines. Thus, if you’re into building or repairing race cars, auto and airplane repair or restoration, an automated machinery builder, or much more, the RDB-10 manual bender will save you time and money from the moment you use it.
shimon bar yochai
This manual tube bender comes standard with 10 different size combinations from 1/4” to 5/8” OD in either 3 or 5 times the diameter radiuses. This manual tube bender works great with mild steel, certain coppers and aluminums, as well as stainless steel. It comes standard with a heavy pedestal, tooling rack, and bending machine.
The RDB-10 hand bender is easy to use and can bend tubing up to 180 degrees. Because of the design, this bending machine can do serpentine bends with ease at very tight radiuses depending on the OD, material and wall thickness.
Specifications:
Included Die Sets: 1/4 x 3D, 1/4 x 5D, 5/16 x 3D, 5/16 x 5D, 3/8 x 3D, 3/8 x 5D, 1/2 x 3D, 1/2 x 5D, 5/8 x 3D, 5/8 x 5DWeight (Lbs.) - 135 lbs
Power Requirements: Manual
Shipping Dim. (LWH) 43" x 17" x 20"
Thursday, October 4, 2012
#Swiss #Precision #Instruments
Swiss Precision Instruments, Inc.
Click Here to view
The
Advantage -- We Put It All Together
For nearly 50 years, Swiss Precision Instruments, Inc. has continuously introduced exciting new products
to the metalworking industry. Since 1956 the SPI family of products has always offered customers Quality, Value and fast Delivery. Today the tradition continues.
to the metalworking industry. Since 1956 the SPI family of products has always offered customers Quality, Value and fast Delivery. Today the tradition continues.
Our catalog features all the SPI Branded Products. You will find numerous New, Unique and
Hard To Find Measuring Tools, Optical Tools, Machine Tool and Shop Accessories.
Hard To Find Measuring Tools, Optical Tools, Machine Tool and Shop Accessories.
The SPI Brand of Products is sold, exclusively, through a network of more than 1,100 dealers throughout
the United States as well as 26 foreign countries.
the United States as well as 26 foreign countries.
If you are currently buying SPI products we want to thank you for your support.
Welcome, if you are new to SPI, we know you will discover the Quality, Value and fast Delivery that has
driven this company for almost a half century.
driven this company for almost a half century.
#Light #Tool #Supply
Light Tool Supply
About Us
President
Light Tool Supply
For
as long as I can remember, I have been surrounded by tools. As a young
boy I worked summers packing orders and unloading trucks at my
father's tool and supply company. After graduating from college, I
immediately went to work full-time for my father and have been in this
industry ever since. Over the years I have learned this business inside
and out and have spent many hours using that knowledge to improve the
mail order supply business. I have seen that business change
drastically over the years. The most dramatic change is from a business
based on the paper catalog to one based on products sold via the
internet. Subsequently, after many years of experience, I decided to
create my own company to do what I know best. Light Tool Supply is now
quickly bringing tools to loyal customers at the best prices possible.
I encourage you to use our vast experience as a resource for all your
tooling needs. If you see something on our website that you do not
feel is the best price, please feel free to email me directly at
michael@lighttoolsupply.com. I also would like you to email me or my
staff with any manufacturer's Part# from our long list of vendors at the
bottom of this page for a low price quote. Additionally, do not
hesitate to contact Light Tool Supply with any of our competitors' part
numbers. It would be my pleasure to cross reference those part numbers
with ours and beat their prices! I realize there are many companies to
choose from; I hope you will choose Light Tool Supply.
Thank you,
Michael Elson
President
Light Tool Supply
Thank you,
Michael Elson
President
Light Tool Supply
Picture-Michael Elson, President of Light Tool Supply working in machine shop. (Picture taken Maplewood NJ 1994)
Picture-My Father, Gene Elson. Current President and Founder of Penn Tool Co. Inc. (Picture taken Newark NJ 1967)
Picture-My Mother, Phyllis Elson, working at an Industry Trade Show 1972
What is the warranty on your tools?
Most of the warranties are by the mfg and are for one year. Some are more or less than one year depending on the mfg. Please inquire on length of warranty before you purchase if concerned.
Do you Ship Outside the United States?
Yes. Light Tool Supply is happy to ship outside the U.S. You can contact us prior to ordering or simply place the order online and we will get back to you. We have found that small light packages(under 5 pounds) can be shipped very economically through USPS or DHL. For questions contact info@lighttoolsupply.com
Who pays for duties and taxes on International Orders?
The customer has to pay the duties and taxes to the delivery company upon receiving the order. These fees are not included in the shipping charge billed by Light Tool Co. These fees are individually determined by your government. If you would like more information please email info@lighttoolsupply.com
How do I calculate shipping?
Most shipping is calculated automatically before you finish paying for your order. In the case of items that are over 150 lbs and must go by truck, shipping is also calculated automatically. However we may need to contact you about additional charges such as residential delivery and Liftgate Truck Charge. We can also ship truck shipments to your local Truck Terminal for you to pick up. For inquires email info@lighttoolsupply.com
What do I do if I receive an order damaged?
Please take extra care to make sure the box or pallet (truck shipments) is delivered in good condition before you sign for it. Light Tool Supply can not accept responsibility for damaged items you sign for in good condition.
#Electrix #illumination
For 45 years, the name Electrix has been synonymous with quality lighting.
http://www.lighttoolsupply.com
For 45 years, the name Electrix has been synonymous with quality lighting. We have been manufacturing lighting fixtures since 1962 and first became involved with architectural luminaires during the 1980's when we started building functional lighting as a part of architecture.
Our design features have always been influenced by the Scandinavian and European creative contributors of our in-house design staff. Over the years, Electrix has built a reputation for successfully collaborating with architects, designers, lighting consultants and engineers resulting in numerous quality lighting design solutions.
Electrix is committed to fine Craftsmanship and
Customer Satisfaction.
Electrix products are designed, built and performance tested to the highest standards at our factory. From concept, to component and material selection, to production, our product quality and your project are our first priority. UL and CUL listings ensure electrical safety and adherence to codes.
Our team of sales professionals offers comprehensive product knowledge and application assistance. We work closely with our sales representatives and specifiers to ensure competitive pricing and timely product delivery. Electrix is committed to satisfying you, the specifier. Our product range is diverse and our broad custom capabilities help to meet your architectural lighting requirements.
Electrix is a fully integrated manufacturing facility. Our products are developed using state of the art CAD/CAM software and built in our manufacturing facilities in New Haven, CT. Superior design, engineering and manufacturing all contribute to building and manufacturing innovative lighting fixtures reflecting your style and design imagination. We welcome the opportunity to help develop your custom fixtures.
Halogen Inspection Lamp with 3-Diopter Magnifier Lens with Base
Model 7310 [ halogen ]
Halogen Inspection Lamp with 3-Diopter Magnifier Lens with Base
[ standard features ]
• 3-Diopter Magnifying Lens (1.75 times magnification, 13" focal length, 5" viewing area )
• 22" long flexible lamp reach
• 14" reach magnifier
• 50 watt low voltage Halogen bulb
• 4" diameter shade - all metal construction
• UVB filter enclosure
• Integrated 12V transformer in 7"
Husky Tools teams up with MMA Fighter Thiago Alves who won his fight at UFC 124
Thiago Alves wins in UFC 124 last night and credits Mike Dolce and he "Dolce Diet" for helping him come to the fight ready and at proper weight. He previously has had some trouble in the past and has shown up for fights looking drained as if trying too hard to make weight. He has previously stated that he has starved himself for weeks prior to fights to make the 170-pound welterweight division The "Dolce Diet" seemed to do the trick as Thiago Alves came ready to fight and looked like a beast ready to smash some skulls.
Last night Thiago Alves picked up a unanimous decision, 30-27 on all cards for the win against John Howard
And Here Thiago Alves is wearing Husky Tools on his shorts. Husky is now sponsoring this MMA Champ.
President of Light Tool Supply
Winner at Grapplers Quest
If Husky is looking for another person to sponsor how about the President of Light Tool Supply, Michael Elson? I am ready! LOL.
Looks like more Tool Companies are sponsoring MMA fighters these days. It think it is a good match and smart of the big manufactures to take notice. The latest is Husky Tools and Thiago Alves. I always love watching Thiago Alves fight. I am looking forward to seeing him wearing the Husky logo on his shorts. It most certainly is good for The Tool Industry getting more exposure. People who buy tools spend money and they also seem to like sports like Mixed Martial Arts. Good luck Thiago and smart move by Husky picking a talented member of The MMA Community to represent their products.
Husky Tools teams up with MMA Fighter Thiago Alves
Husky Hand Tools aligned itself with Alves because of the similarities in traits between the brand and the fighter: hard working, diverse and powerful.
“Because of all the upfront hard work and innovative powerful designs, Husky Hand Tools and Accessories continue to deliver reliable performance that helps to make tough jobs easier” said Iron Bridge Tools Karen Gough. “Just like when you use a Husky Hand Tool, in Mixed Martial Arts success comes by combining power with finesse and reliability; and that is also the winning combination you get with the passionate and committed Thiago Alves.”
Thiago Alves, a native of Brazil and current resident of Coconut Creek, FL has been a winning MMA Fighter for 12 years. With a 22-5-0 record, Thiago a UFC and AFC Veteran, has been King of the Cage, Mass Destruction Champion, Reality Fighting Champion, Shooto America Veteran, 3X Brazilian State Champion Muay Thai, and more. Alves, a determined and ardent winner overcame a potentially career ending health issue earlier this year, and through a comprehensive new diet and strengthening workout schedule, Alves is back to top form and ready to win the December 11th match up!
Innovative, Reliable and Hard Working…that Means Husky Hand Tools and Thiago Alves!
About Iron Bridge Tools and Husky
Founded in 2006, Florida based Iron Bridge Tools has quickly become a worldwide marketer of innovative and top-quality hand tools and accessories. With offices throughout the United States and in China, Iron Bridge Tools produces branded and custom label tools available in leading retailers across the globe, including products marketed under the Husky line of hand tools, available exclusively at The Home Depot. Husky products are well known for their quality, unique designs, durability and affordability.
Subscribe to:
Posts (Atom)