GMC SINGLE COLUMN VERTICAL LATHE $154,950.00

$154,950.00

GMC SINGLE COLUMN VERTICAL LATHE

Model VTL1600X10-5S Single Column Vertical Lathe is one kind of mechanical processing equipment integrated with the advanced technology of mechatronics & hydraulics with maximum turning diameter of 63” and maximum height of work piece of 39-1/4”. It is particularly suitable for the rough & fine finish machining of internal & external cylindrical surface, internal & external conical surface, plane surface cutting-off & threading of ferrous metal, non-ferrous metals parts with high speed tool and carbide alloy tool.
  

Specifications:
Worktable diameter: 55-1/8"
Max. turning diameter of vertical rail head: 63"
Max. turning diameter of side head: 55-1/8"
Max. height of work piece: 39-1/4"
Max. weight of work piece: 11,000 LBS
Max. cutting force of vertical rail head: 25000N
Max. cutting force of side head: 20000N
Total cutting force: 40000N
Max. torque of worktable: 25000N.m
Steps of worktable speed: 16 steps
Speed range of worktable: 5~160r/min
Feed steps of vertical & side head: 12 steps
Feed range of vertical & side head: 0.03"-3.38"/min
Travel of crossbeam: 25-1/2"
Rapid speed of vertical & side head: 71"/min
Elevation speed of crossbeam: 26"/min
Horizontal travel of vertical rail head: 36"/min
Vertical travel of vertical rail head: 32"/min
Horizontal travel of side head: 25"
Vertical travel of side head: 36"
Rotational angle of vertical tool head: ±30º
Section size of tool bar(WXH): 1-1/4"X1-5/8"
Power of main motor: 40 HP
Motor power for rapid: 2HP
Motor power for feed: 1-1/2HP / 2 HP
Overall dimension: 105X108X139"
Weight of machine: 28,000 LBS(Approx.)

STANDARD EQUIPMENTS:
TOOL HOLDER, PENTAGON TURRET, TOOL SHANK, CONICAL HOLE TOO SHANK, HEXAGONAL SPANNER, SQUARE SOCKET SPANNER, TRIANGULAR SPANNER, WASHER, INNER HEXAGONAL SPANNER, SQUARE SOCKET BENDING SPANNER, PADS, FOUNDATION BOLTS, HEXAGONAL NUT, SEALING RING, OIL GUN

General Layout
This machine is composed of column, main gearbox, worktable, elevating mechanism of crossbeam, vertical tool head, electrical system and hydraulic system. Main gearbox is consolidated inside column, worktable is consolidated in front of column and crossbeam can make up & down movement on the guide way of column. On crossbeam a vertical tool head is set, which can make horizontal & vertical feed or rapid movement. Worktable is driven by AC motor. This machine is equipped with pendant station on which all operation can be done concentrated.

Main Transmission Mechanism
The main transmission is driven by AC motor via hydraulic cylinder to drive shifting fork for putting into gear and speed change so as to enable worktable to obtain 5-160r/min speed with 16 steps speed regulation and its operation is concentrated on the pendant station.

Feed Mechanism
The horizontal & vertical feed of vertical tool head is driven by AC motor and the horizontal & vertical feed or rapid movements of vertical tool head can be obtained by means of cutting feed box

Worktable
The hydro-dynamic guide way is adopted for worktable and on its main spindle mounted with two sets 3182100 type double row shot cylindrical roller bearings with its tapered inner ring via which the radial clearance can be adjusted. Two bearings are all lubricated through oilflow to ensure the axial and radial accuracy of worktable. Four hand operated jaws are set on worktable surface.

Column
The column is connected with the base of worktable and made from high strength & low stress cast iron. On the column the elevating mechanism for crossbeam is set, which is driven by AC motor to realize the up & down movement of crossbeam on guide way of the column.

Crossbeam
The crossbeam can make up & down movement on the guide way of column and its elevation is done by single screw. On the crossbeam, safety floating nut device is set for ensure the precise and safety of crossbeam while elevating. The crossbeam is clamped tightly on the column by hydraulic cylinder via lever multiplying and pushing wedge or loosened, this clamping device is simple for easy maintenance and operation.

Vertical Rail Head
The vertical tool head is of three-layer structure and composed with slide base of crossbeam, rotary slide base and ram , both of them are made from high strength & low stress cast iron and the ram is made from nodular cast iron.

Hydraulic System
The hydraulic system is composed of hydro-dynamic guide way control system of worktable, speed change of main transmission system, clamping & loosening system of crossbeam and lubrication system of main transmission. The main hydraulic parts are all from the famous manufacturers inside China or in the world in order to guarantee these parts quality performance. Lubrication method is of auto circulated lubrication and oil hand pump lubrication. 

Machine Accuracy

• Radial run out accuracy of worktable
  Within 39-1/2” diameter is of 0.0008”and as per increased 39-1/2” allowed increased clearance is 0.0004”
• End face run out accuracy of worktable
  Within 39-1/2” diameter is of 0.0008” and as per increased 39-1/2” allowed increased clearance is 0.0004”
• Perpendicularity between vertical movement of crossbeam and worktable surface
  On the plane perpendicularity to crossbeam: 0.002” per 39-1/2” length
  On the plane parallel to crossbeam: 0.0015” per 39-1/2” length
• Parallel between vertical tool head movement and worktable surface 0.001” at any measured length
• Perpendicularity between vertical ram movement and worktable surface
  On the plane parallel to crossbeam: 0.001” at any measured length of 39-1/2”
  On the plane verticality to crossbeam: 0.002” at any measured length of 39-1/2”
• Perpendicularity between side tool head movement and worktable surface
  0.0004”at any measured length of 12”
• Parallel between ram of side tool head movement and worktable surface
  0.001” at any measured length of 12”
• Machining accuracy: IT7
• Roughness of work piece surface: Ra3.2μm
• Roundness of cylindrical finish turning: 0.0004”
• Cylindricity of cylindrical finish turning: 0.0004” PER 12” LENGTH
• Flatness of end face finish turning: 0.001”

Michael Elson Light Tool Supply 

Michael Elson Light Tool Supply 

Michael Elson Light Tool Supply 

Michael Elson Light Tool Supply