#CUTTERMASTER TOOL AND CUTTER GRINDER THE ORIGINAL
Order @ Light Tool Supply http://www.lighttoolsupply.com/CUTTERMASTER-TOOL-AND-CUTTER-GRINDER
CUTTERMASTER ENDMILL SHARPNER
CUTTERMASTER Tool & End Mill Sharpener complete with Air Bearing Fixture, Work Area Lighting, 5” Cup Aluminum Oxide Wheel & Air Filter
- Grinds O.D.s and ends of standard end mills in one setup within just a few minutes.
- Extremely versatile and is used for much more than just end mills. With the z-axis you get 8 different axes to work with for unlimited versatility.
- 1 Machine grinds it all end mill, drills, roughing endmill, taps, countersinks, carbide tools, radius end mills, lathe tool bits, various forms tools, reamers, performs gashing and much more.
- The pneumatic finger instantly and automatically sets primary and secondary clearance angles with the flip of switch.
- Dials zero out.
- Air bearing has a 360 degree swivel base for taper grinding.
- The Jet-Stream air bearing fixture is precision honed and capable of grinding to close tolerances. The spindle sleeve is made from stainless steel and the spindle itself is hard chromed steel.
- Takes standard 5C collets, with end mill holders available that can hold shank sizes up to 2".
- Tables are cast 2" iron and precision ground.
- Motor/spindle assembly tilts to positive and negative angles, cutting tool clearance angles can be adjusted as needed.
- Grinding chart provides clearance angles for all end mills from 3/16"-3".
- 1 year warranty against factory defects and workmanship.
Air bearing swing over table - 9.8".
Cutting tool capacity - 2" shank, 9.8" O.D., 10.5" flute length
T-Slot dimension - .800 x .500 x .670
Table feed graduations - .001 or .02mm
X-Axis table travel - 6"
Y-Axis table travel - 3", plus motor sildes back & forth 6"
X-Axis table working space - 16.5" x 5.5"
Y-Axis travel working space - 13" x 5.5"
Wheel - 5" cup (or 6" dish with Z-axis), 1-1/4" arbor Motor tilt - +35/-8 degrees
Motor - 1/3 hp, 3450 rpm, 110v/60hz or 220v/50hz
Net weight - 180 pounds 82 kilos,br> Gross weight - 232 pounds / 106 kilos
Machine dimensions, not including handles - 21" x 20" x 21"
Shipping dimensions - 30" x 28" x 29"