#CUTTERMASTER TOOL AND CUTTER GRINDER THE ORIGINAL

#CUTTERMASTER TOOL AND CUTTER GRINDER THE ORIGINAL

Order @ Light Tool Supply  http://www.lighttoolsupply.com/CUTTERMASTER-TOOL-AND-CUTTER-GRINDER

CUTTERMASTER ENDMILL SHARPNER

CUTTERMASTER Tool & End Mill Sharpener complete with Air Bearing Fixture, Work Area Lighting, 5” Cup Aluminum Oxide Wheel & Air Filter

• Grinds O.D.s and ends of standard end mills in one setup within just a few minutes.
• Extremely versatile and is used for much more than just end mills. With the z-axis you get 8 different axes to work with for unlimited versatility.
• 1 Machine grinds it all end mill, drills, roughing endmill, taps, countersinks, carbide tools, radius end mills, lathe tool bits, various forms tools, reamers, performs gashing and much more.
• The pneumatic finger instantly and automatically sets primary and secondary clearance angles with the flip of switch.
• Dials zero out.
• Air bearing has a 360 degree swivel base for taper grinding.
• The Jet-Stream air bearing fixture is precision honed and capable of grinding to close tolerances. The spindle sleeve is made from stainless steel and the spindle itself is hard chromed steel.
• Takes standard 5C collets, with end mill holders available that can hold shank sizes up to 2".
• Tables are cast 2" iron and precision ground.
• Motor/spindle assembly tilts to positive and negative angles, cutting tool clearance angles can be adjusted as needed.
• Grinding chart provides clearance angles for all end mills from 3/16"-3".
• 1 year warranty against factory defects and workmanship.

Air bearing stroke - 10.5"
Air bearing swing over table - 9.8".
Cutting tool capacity - 2" shank, 9.8" O.D., 10.5" flute length
T-Slot dimension - .800 x .500 x .670
Table feed graduations - .001 or .02mm
X-Axis table travel - 6"
Y-Axis table travel - 3", plus motor sildes back & forth 6"
X-Axis table working space - 16.5" x 5.5"
Y-Axis travel working space - 13" x 5.5"
Wheel - 5" cup (or 6" dish with Z-axis), 1-1/4" arbor Motor tilt - +35/-8 degrees
Motor - 1/3 hp, 3450 rpm, 110v/60hz or 220v/50hz
Net weight - 180 pounds 82 kilos,br> Gross weight - 232 pounds / 106 kilos
Machine dimensions, not including handles - 21" x 20" x 21"
Shipping dimensions - 30" x 28" x 29"