Tuesday, March 26, 2013

#Digimatic Offset Centerline Calipers


Mitutoyo Offset Centerline Calipers - Series 573

Mitutoyo Offset Centerline Caliper
  • Specially designed for center to center distance measurements on the same and offset planes.
  • Can also measure from edge to center.
  • Hole diameter should be in the range of 1.5mm-10mm (.06"-.4").
  • With SPC data output. (series 573)
  • Supplied in fitted plastic case.
Technical Data

Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models)
Resolution*: 0.01mm or .0005"/0.01mm
Graduation**: 0.05mm
Display*: LCD
Length standard*: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed*: Unlimited
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 3.5 years under normal use
*Digital models **Analog models

Function of Digital Model

Origin-set, Zero-setting, Power On/Off, Data output, inch/mm conversion (inch/mm models) 
Alarm: Low voltage, Counting value composition error
Order No 573-705 573-706 573-708
Range .4-6in 10-150mm .4-8in 10-200mm .4-12in 10-300mm
Accuracy .0015in .0015in .0015in
Resolution .0005in 0.01mm .0005in 0.01mm .0005in 0.01mm
Mass 157g 177g 320g

No comments:

Post a Comment