Dake Hydraulic Presses Elec-Draulic I-Single Acting Workheads

An advanced design, single-acting hydraulic press with fingertip control from Dake.

Features:

• Electric operation provides smooth, consistent pressing action
• Rapid ram approach quickly moves ram to work to save production time
• Movable workhead is roller mounted on ball bearings for off-center work
• Safety valve protects against overloads
• Adjustable table permits easy vertical movement by means of self-locking hoist
• Single-acting cylinder provides fast, reliable pressing and internal spring return
• Variable ram speed allows fingertip control of ram movement for precise pressure control
• Rapid ram return starts ram return as soon as release valve is opened and may be stopped at any point by closing the valve
• Stroke indicator ensures accurate ram control
• Standard Equipment:
• Frame
• Two forged steel V-blocks
• Flat ram nose
• Motor 2, 3 hp; 230/460-3-60
• Pressure gauge
• Self-locking table hoist
• Workhead
• Two forged steel table plates
• V-ram nose
• Stroke indicator
• Safety relief valve
• Specifications:
  
  

  Model	5-025	5-050	5-150	5-200
  Number	905025	905050	905150	905200
  Capacity (Tons)	25	50	150	200
  Horsepower	2	2	2	2
  RPM	1,800	1,800	1,800	1,800
  Ram Speed - Advance	80	40	16	16
  Ram Speed - Press	14	7	2-3/4	2-3/4
  A - width between uprights	32-3/4	32-3/4	48	48
  B - width between table channels	7-1/4	7-1/4	12-1/4	18-1/4
  C - minimum ram to table	5	5	10	6
  D - maximum ram to table	40	40	30	30
  E - ram travel	10	10	16	16
  F - horizontal workhead travel	14-3/8	14-3/8	24-3/4	22-1/8
  J x K - base (inches)	43-1/2 x 36	43-1/2 x 36	66 x 42	64 x 48
  L - height (inches)	85	87	95	100
  Weight	1,000 lbs.	1,320 lbs.	3000 lbs.	4380 lbs.

   
•  

#Dake #lab #Press

Order at   http://www.lighttoolsupply.com/catalog/Dake-Laboratory-Presses


Dake Laboratory Presses

Features:

• Electric platens: The self-leveling, electrically cooled, precision ground steel platens are pre-wired into the control panel. Heating elements are replaceable.
• Hydraulic system: A unique pump design provides a rapid advance of the ram utilizing the high volume-low pressure portion of the pump. When the down stroke of the pump lever is used, the pump automatically converts to the high pressure-low volume output providing accurate control and easy operation. The carefully -constructed hydraulic system enables the press to hold pressure for extra long periods of time. The release valve on the side of the press enables the operator to adjust the pressure accurately as well as accomplish gradual decompression or fast opening of the press.
• Control panel: A conveniently-located panel at the top of the press is isolated from the press and is cooled by an air space between the housing and the upper platen. All electricals are mounted on a common plaque for easy servicing.
• Precise temperature control: Each platen has its own complete set of controls including adjustable thermoswitch, built-in thermometer, power switch and pilot light. Temperatures are accurately controlled from 100˚ to 600˚F.
• Two position ram: A removable adaptor is placed between the self-leveling platen and the ram. By removing the adaptor, a greater daylight dimension is available.
• Specifications:
  
• 

Dake Dura Press Three Phase

Order at Light Tool Supply   http://www.lighttoolsupply.com/Dake



Dake Dura Press Three Phase

Features:

The price leader for a total capability press. These Three Phase Dura Presses feature a double-acting cylinder, ram with lifting eyes, and rapid advance of the ram. They also come with a 2HP submerged motor or a 3 HP submerged motor.
Force 100 shown in Image.

• Double acting cylinder design with 5-part oil seals for smooth operation and a tight seal.
• Welded heavy steel plate frame for greater rigidity.
• 3 HP submerged motor drives 3 centrifugal pumps for quiet, steady oil flow (100 ton model).
• All electrical controls are low voltage (24V).
• Preset and factory-sealed relief valve to prevent exceeding pressure capacity.
• Ram has lifting eyes that attach a chain to hydraulically move the table.
• 2 HP submerged motor drives two centrifugal pumps for quiet, steady oil flow (40 & 70 ton models)
• Smooth, responsive control valve.
• Rapid advance of the ram to the work piece - speed shifts automatically when contact is made.
•  

  Standard Equipment
  Frame 2 cast steel table plates Lifting Chain	Cylinder Pressure gauge

   
• Specifications:
   
•  
• Force 100 shown.
  

Dake Bench Presses - C-Frame

Order at http://www.lighttoolsupply.com





Dake Bench Presses - C-Frame

Features:

• Adjustable return stroke, activated by proximity switch, permits accurate control of ram movement.
• Light-sensitive thumb pads must be engaged simultaneously before ram will move and cannot be mechanicallly by-passed.
• Hydraulic cylinders are manufactured to withstand 3,000 psi, but are used at less than 2,000 psi to prolong service life.
• Remote pressure adjustment easily sets maximum pressure desired.
• Run-jog selector allows fast, easy job set-up.

Standard Equipments:

• For each press ordered, select the bolster, nose piece, and desired voltage that meet your needs.
• Nose pieces available. Select one. 1. Threaded nose piece. 2. Flanged nose piece.
• Bolsters can easily be removed and replaced for different jobs.
• Select one for each press ordered.
• Additional bolsters are available as optional equipment. 1. Plain bolster 2. Bolster with U-slot 3. Bolster with bored hole.
• Voltages available. Select one. 1. 208 volts, 3 phase 2. 230 volts, 3 phase 3. 460 volts, 3 phase 4. 575 volts, 3 phase.
• Specifications:

  model capacity (tons) horsepower rpm ram speed- advance ram speed- press ram speed- return ram thread dimensions A throat (inches) B table slot width (inches) C ram travel (inches) D maximum ram to table (inches) E table to base (inches) FxG table (inches) HxI base (inches) J height (inches) weight (lbs)

  28-604  4  1  1,800  510  62  475  1"-14x1-1/...  7-1/2  2-1/2  12  12-1/2  18x11-1/2  31x19-3/4  49-1/4  1,229

  28-608  8  2  1,800  481  39  447  1-1/2"-12x...  7-1/2  2-1/2  12  12-1/2  10  18x11-1/2  36x20-1/2  50  1,355

  28-612  12  5  1,800  511  62  474  1-7/8-12x1-3/4 10-1/2  7  12  14-1/2  12  23x19  47-1/2x24-3/4 58-5/8  2,460

  

Dake Arbor Presses-Ratchet Leverage

Arbor Presses -
Ratchet Leverage

http://www.lighttoolsupply.com/Dake

Models / Specifications Model number capacity (tons) leverage ratio ram size (inches) maximum diameter work A throat B largest arbor C capacity over table D capacity over table plate E base length F base width G height (inches) weight (lbs) 1-1/2  902001  3  48:1  1-1/4x1-1/...  14  7  2  11-1/2  10-3/4  7-1/4  18  19  145  1-1/2B  902002  3  48:1  1-1/4x1-1/...  14  7  2  18-1/4  17-1/2  8-1/4  21  28  196  1-1/2C  902003  3  48:1  1-1/4x1-1/...  35  17-1/2  2  12  11-1/4  8-1/4  37-1/4  24-3/8  425  1-3/4  902007  3  48:1  1-1/4x1-1/...  14  7  2  11-1/2  10-3/4  n/a  n/a  18-1/2  125  Model number capacity (tons) leverage ratio ram size (inches) maximum diameter work A throat B largest arbor C capacity over table D capacity over table plate E base length F base width G height (inches) weight (lbs) 3A  902004  5  55:1  2x2x23  10  4  16  14-1/2  10  24  28-1/2  450  4M  902006  5  55:1  2x2x23  20  10  5-1/4  26  24-1/2  21-1/2  29  58  1,045

Model 1-1/2 C shown

Dake Power Hammer H100

Order At
http://www.lighttoolsupply.com/Dake-Power-Hammer-H100


Ideal tool for fabricating one-of-a-kind or impossible-to-find replacement parts.


The Dake Power Hammer H100  120-volts of Power!

              

Dake Power Hammer H100    Features
Design and form custom hot rod, motorcycle, aviation, and sheet metal parts in your own shop. 11 gauge aluminum capacity (annealed 3003H14) Wheels on base included for portability and storage	16 Gauge steel capacity 7" maximum opening with infintely adjustable bottom die holder

Standard Equipment
One set of thumbnail shrinking dies. Manual, instructional video and one year warranty.	Die set: industry standard 3/4" (19mm) square tool post for standard shrinking or stretching square shank die sets.

Models / Specifications
model number   electrics horsepower hammer speed A throat B maximum opening C floor to hammer D base E height (inches) weight (lbs)   H100  980100    120-volt  1  900 fmp  18"  7"  36 3/4"  24x33"  67  520

Baileigh 220V Hydraulic Double Pinch Roll Bender R-H150

 

Baileigh 220V Hydraulic Double Pinch Roll Bender R-H150

The R-H150 ring roller is a double pinch design that has two independent bottom rolls and one fixed top roll. The advantage of this type of section roll bender is that the operator can pre-bend and post bend the material which saves valuable production time, material, and allows for tight rolling. The bottom rolls have independent hydraulic controls tied to an encoder for the exact position which is displayed on the programmable DRO controller.
The programmable DRO controller can have a preset bottom position as well as a preset top position that makes
this tubing roller a repeatable bender which is a must have for larger production runs of tube, pipe, section, or angle iron.

This ring roller consists of a very heavy steel plate frame that is electro welded and tied to a heavy duty industrial grade hydraulics drive transmission that powers all three rollers. This heavy duty design has a Siemens® inverter drive to allow for soft startups of the main motor, as well as overload protection when bending at maximum capacity. The lateral roll guides and angle guide rolls are independently hydraulically driven for fine tuning when coiling. This tubing roller is capable of bending up to 6-1/4" round tubing and 4-3/4" x 4-3/4" x 1/2" angle iron, making it a very powerful section roll bender for a great price.

The R-H150 ring roller comes standard with hydraulic drive of rolls and 2 axis guides, segment rolls, and a simple to use operator pendant. The operator pendant housesall main controls of the machine and can be moved to the proper position to operate the tubing roller. This machine can operate in the vertical or horizontal position as required for the job.

Baileigh ring rollers are usually available for shipping within 72 hours or less. The R-H150 tubing roller has been built to some of the highest standards on the market for a fair price. This machine will pay the fabricator back handsomely and will be a solid fixture of profit for decades to come

Specifications:

Capacity	Size	Min Diameter
Pipe	5.5” (sch.40)	73"
Round Tube	6.250” (.125”)	118"
Square Tube	4” (.196”)	118"
Angle Iron	4.75” (.5”)	60"
Solid Square	3”	32"
Solid Round	3.375”	36"
Flat Bar Easy Way	7.875"(2")	40"
Flat Bar Hard Way	5.5" (1.125")	118"

Roll Adjustment:	Hydraulic
Pinch:	Double
Shaft Diameter:	120mm/4.724"
Roll Diameter Upper:	390mm/15.354"
Roll Diameter Lower:	390mm/15.354"
Driven Rolls:	3
Digital Readout:	Yes
Speeds:	3.25 rpm
Motor:	20 hp
Power Requirement:	220v / 3phase
Shipping Dimensions (L/W/H):	79” / 59 ” / 80”
Shipping Weight:	10,400 lbs.

LULZBOT 3D PRINTERS NEW PRODUCT FROM PENN TOOL CO

Penn Tool Co
1776 Springfield Ave.
Maplewood New Jersey 07040
United States

JET Tools Partners with Rusty Wallace Racing in 2015

Order Jet Tools at http://www.lighttoolsupply.com/Jet



JET is excited to announce their partnership with #Rusty #Wallace #Racing at PRI 2014. JET will be sponsoring the #66 Ford Fusion, driven by Rusty’s son Steve Wallace, during the newly-announced Championship Auto Racing Series (CARS) Tour. Follow Steve Wallace’s progress during the 2015 racing