Dake Bench Presses - C-Frame

Order at http://www.lighttoolsupply.com





Dake Bench Presses - C-Frame

Features:

• Adjustable return stroke, activated by proximity switch, permits accurate control of ram movement.
• Light-sensitive thumb pads must be engaged simultaneously before ram will move and cannot be mechanicallly by-passed.
• Hydraulic cylinders are manufactured to withstand 3,000 psi, but are used at less than 2,000 psi to prolong service life.
• Remote pressure adjustment easily sets maximum pressure desired.
• Run-jog selector allows fast, easy job set-up.

Standard Equipments:

• For each press ordered, select the bolster, nose piece, and desired voltage that meet your needs.
• Nose pieces available. Select one. 1. Threaded nose piece. 2. Flanged nose piece.
• Bolsters can easily be removed and replaced for different jobs.
• Select one for each press ordered.
• Additional bolsters are available as optional equipment. 1. Plain bolster 2. Bolster with U-slot 3. Bolster with bored hole.
• Voltages available. Select one. 1. 208 volts, 3 phase 2. 230 volts, 3 phase 3. 460 volts, 3 phase 4. 575 volts, 3 phase.
• Specifications:

  model capacity (tons) horsepower rpm ram speed- advance ram speed- press ram speed- return ram thread dimensions A throat (inches) B table slot width (inches) C ram travel (inches) D maximum ram to table (inches) E table to base (inches) FxG table (inches) HxI base (inches) J height (inches) weight (lbs)

  28-604  4  1  1,800  510  62  475  1"-14x1-1/...  7-1/2  2-1/2  12  12-1/2  18x11-1/2  31x19-3/4  49-1/4  1,229

  28-608  8  2  1,800  481  39  447  1-1/2"-12x...  7-1/2  2-1/2  12  12-1/2  10  18x11-1/2  36x20-1/2  50  1,355

  28-612  12  5  1,800  511  62  474  1-7/8-12x1-3/4 10-1/2  7  12  14-1/2  12  23x19  47-1/2x24-3/4 58-5/8  2,460