#Mahr/Federal Pocket Surf Portable Surface Roughness Gage

#Mahr/Federal Pocket Surf Portable Surface Roughness Gage

 Order at Light Tool Supply http://www.lighttoolsupply.com

Portable Surface Roughness Gage.

• Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory.
  
• Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging.
  
• Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz.
  
• Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/.030 in.
  
• Operates in any position – horizontal, vertical, and upside down
  
• Easy-to-read LCD readout presents the measured roughness value, in microinches or micrometers,
  within half a second after the surface is traversed.
  
• Out-of-range (high or low) and “battery low“ signals are also displayed.
  
• Four switchable probe positions – axial (folded) or at 90°, 180° or 270°
  
• Even difficult-to-reach surfaces such as inside and outside diameters are accessible.
  
• Integrated data output for SPC-processing units that is compatible with the most common data processing systems.
   

http://www.mahr.com